adding some pictures.

I got installed a factory carb from girlzlikemud2  here on the forums and that cleared up my black smoke issue.  Here are some pictures of the rig the way it sits now, which is the same condition I purchased it in.  I'm still unsure if I want to cut it up and make a trial rig, or lower it and build it for DD and mild trail riding.  The PO decided he would spray paint it black.  He painted over some rust, didn't tape it off, and used two different colors along with not finishing the job.  I have found another bed for it for free I just have to go pick it up.

I'm open to suggestions on the rig.  I need some ideas. 

Anything you see wrong that you want to point out feel free!

http://picasaweb.google.com/lh/photo/KJiyy2VMJkI0Yf8QyLH4Bw?feat=directlink
http://picasaweb.google.com/lh/photo/F9RYa3_yZh75GL2lr6G0jQ?feat=directlink
http://picasaweb.google.com/lh/photo/0VyuMCuGPsGsBvP8tfjyEw?feat=directlink
http://picasaweb.google.com/lh/photo/gbhQVAmlzxfWNC4XRb7udQ?feat=directlink
http://picasaweb.google.com/lh/photo/dIYtsg83pTzE99HCOkIoOQ?feat=directlink
http://picasaweb.google.com/lh/photo/BP_srYVaWvPG83zmkgj3Jg?feat=directlink
http://picasaweb.google.com/lh/photo/8vIdabgOWAzvMaBA9MDRLA?feat=directlink
http://picasaweb.google.com/lh/photo/AAOuxca4F2rf-xl4-khedw?feat=directlink
http://picasaweb.google.com/lh/photo/wUABpJJj4oMGMorxmku44Q?feat=directlink
http://picasaweb.google.com/lh/photo/xiyZ8MbfxO-0PnzQ2fzpMg?feat=directlink
http://picasaweb.google.com/lh/photo/G8cSa3ycORezjHtfrpOy-Q?feat=directlink
http://picasaweb.google.com/lh/photo/8EtSQHOgTkY1PyHtP0a9Qw?feat=directlink
http://picasaweb.google.com/lh/photo/0Q-2hQwGAguHkQxdZQw3nQ?feat=directlink
http://picasaweb.google.com/lh/photo/7SZWaI5lxmg5W_CdVbtQEA?feat=directlink
http://picasaweb.google.com/lh/photo/h_3mJHQ8hDDzL-lSz56DJQ?feat=directlink
http://picasaweb.google.com/lh/photo/431J5WM_S7HALI_0wj3rOA?feat=directlink

http://picasaweb.google.com/jpharper33/83Toyota4x4#

http://picasaweb.google.com/jpharper33/83Toyota4x4?feat=directlink