I checked fuel pressure on the runner today, along with a few other things. I still think i have a bad afm. I'm hoping this next one i buy will fix it. I can drive it somewhat when the CEL comes on and it is in limp mode, so i took it outside today for some updated pics. I also flexed it a bit to see how everything clears since i have lowered it so much. I measured for bump stops, and marked areas where i need to trim. I ended up trimming the rear fender on one side of the truck after i brought it back in the garage. Its lookin like it will turn out pretty good. I cut the top layer of sheetmetal out, and cut the pinchweld out. then i took the inner fender sheetmetal and put some slits in it so i could stretch it back out to the outer fender. IDK yet if this will be enough trimming all together, but i will find out as soon as it runs good again and i can wheel it. Oh yeah and i love the dual cases with 4.7 gears in the second one! it crawls so freekin slow, it rocks!
![Rocking Out :rockingout:](https://board.marlincrawler.com/Smileys/marlin/rockingout.gif)