So Tim and I just got done throwin the dual setup in the BR. Looks like i have a few mods to take care of tomorrow. Gotta remove the rear heater/consol setup and see how i can move it back or somethin so the shifter will fit. Gotta cut a section out of the "horseshoe" crossmember so the driveline will fit through. I will also have to modify the t-case crossmember i built, then i can get the drivelines made. Looks like the front DL will be about 36.5" long and the rear will be 40.5" long. So with that being said i should be able to use my long slip front driveline in place of the rear if i ever break the rear and still need to drive home on the highway