Nice man! That stock crossmember hangs down like a boat anchor.. Is 18.5 with the 35's or 37's?

thanks!  well its got the 35's on it right now.   I got the skid plate all welded out and it turned out pretty good!  overall it turns out i gained 4.5" clearance.  it now measures 23" to the lowest point on the skid plate with the 35's on it.  that number is about 1.5" lower than the bottom of the frame.  So when i put the 37's back on it will be a little higher, but i plan on lowering the whole truck another 1.5"-2".  so realistically the final numbers will be around 22" to the skid and 23.5" to the frame with the 37's on it.  here's a couple pics... crappy cell phone pics again!