I borrowed a tap from my uncle that he had ground down the end of it to make it shorter. I was then able to tap the entire thing. It might be worth buying a tap to ground down to make sure you get more than 3-4 threads.
Thought I would bump this for my own question....
I have just finished hooking everything up and i am in the process of bleeding everything. I seem to either not know what i am doing or i just dont know what i am doing
info on set up--4.3l, saginaw pump, toy ifs box, 6" stroke ram
When the truck is in the air the ram will not move until i go all the way to lock, this is turning either direction.
With tires on the ground the ram moves immediately but the rest of the steering will not move until the ram has maxed out its stroke.
I have been going back and forth with the steering wheel both engine running and not, also tires in the air and on the ground. I have continuously bleed the box and air comes out on the occasion.
Does any of this sound familiar to when any of you bleed your box? Sny better tips on getting this working properly? (or whatever normal is if you care to explain)
i got 4 threads in btw