duals are in converted front case to top shift mc08 Rotated 10* 23spline adapter 4.7 in rear case twin sticks held up with front range crossmember and skid.
got the crossmember up as high as I could (bushings come through the floor) and had to clearance the floor as well. If I would have had a body lift I could have got the whole assembly up higher. In the future I might go with just a center section mount and build the rest myself. the arms on the crossmember are what limits how high you can go.
I also need to make a ring to hold the boot to the twin sticks down
you can also see my new sr5 buckets out of an 85 much better than the old bench
