did u put shocks and a steering stabilzer on it??? im still working mine out i think the trunion bears are off im working on. im still stomped. its wierd how some people do the same swap and they get none off this.
yep, shocks and stabilizer are on.... My alignment was fine before i did the swap...Won't have time to tear into it this weekend but I'm going to start with the shackles and bushings and then see if there is any way that the center pins are not in the same alignment in their respective holes (one center pin is pushed to the front of the spring perch hole and the other pin is against the back of the spring perch hole) and causing the front axle to be slightly crooked....not sure that little bit could make a difference???