Table 1: 22RE (2.4L-4 cyl) - TPS Adjustment Specifications
- Early model p/n: 89452-20060
- Late model p/n: 89452-12040 Test Clearance between
lever and stop screw Between terminals Resistance /'85-'88* (ohms) Resistance /'89*-'95 (ohms)
1. 0.00mm (0.000") VTA - E2 200-800 470-6100
2. 0.57mm (0.0224") IDL - E2 < 2.3K < 2.3K
3. 0.85mm (0.0335") IDL - E2 Open / Infinite Open / Infinite
4. Wide Open Throttle VTA - E2 3.3K-10K 3.1K - 12.1 K
5. n / a Vcc - E2 3.0K - 7.0K 3.9K - 9.0K
everything checked out
(fig D) me checking between terminals vcc and E2, for an 89' the table shows any where between 3.9K and 9.0K is acceptable... meater reads 5.0K so i'm golden
Fig D
