« on: Nov 26, 2004, 10:15:34 AM »
Never say it can't be done. There's no direct bellhousing, but a solution to adapt it...
Thanks to John Douglas http://members.ozemail.com.au/~jonhel5/
I learned that Marks makes an adapter to mate the R150F, and/or R151F (both with 165 mm or 6.5 inch long input shafts) to a G52/54 or W56/W58 bellhousing.
See http://members.iinet.net.au/%7Eozrunner/AdapterR150.html . I am waiting on the Marks part number. This unit should be available in the US via Advance Adapters - Marks agent in North America.
JR
Thanks to Adrian http://www.chevtorque.com.au and http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=22269 The part number for that adapter plate is MFK 750 cost is $375 (Australian ?) from the Marks factory in Melbourne. It adds 16mm to the length of the drivetrain. I'm waiting on clarification if it requires removal of the input shaft bearing retainer/cover on the R150F/R151F/R452
JR
Thanks for the info Adrian.
I thought it was about 1/2 inch thick looking at the pic. Actually my converter says 16 Millimeters equals 0.629921 Inches. Not much of a consequence is it?
Do you have to remove the R150F/R151F input shaft bearing retainer/cover to install the adapter?
16mm is about 5/8 of a inch
Yes you have have to remove the input shaft bearing retainer cover to install the adaptor plate
Adrian
JR
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
I'm a member of P.E.T.A.
People Eating Tasty Animals
There's no nookie like chinookie
No butts like halibuts
Fish are not our friends, they're food.
Eat more moose - 10,000 wolves can't be wrong
Calling an illegal alien an "undocumented immigrant" is like calling a drug dealer an "unlicensed Pharmacist".