like the finish on it

Me too!

kyle is that stuff very hard to put in?  what hold it down when you get to the wall?

Really simple to put in.
1. Prep floor; no staples or nails, shim any thing more than 1/8"
2. Lay down pad; no need to staple, but you can if you want
3. check wall squareness
4. Lay down first piece, put 3/8" spacers between wood and wall
5. Second piece is inserted in to first piece by tilting the back up and pushing down. Light taps with hammer on block will snug it in to place.
6. Do rest of area
7. Pull spacers and lay down trim

The wood will lay flat once installed, no need to hold it down with anything. Trim will hold down the edges though.