cracked the star which stripped out the shaft and whatnot right there.  also took out the third to make sure everything was fine and found one broken tooth and all the other teeth are cracked as if the pinion slid outward on the gears and kind of pealed the teeth on the ring gear.  looks to me like a bad setupm but either way they are trash.  2 trips on rocks and 3 in the snow.  also both hubs are cracked where the snap ring is on the inside of the hub gear.  kyle pretty much destroyed his truck in about 100yds.

so. . . . . what are you going to do to the truck with the tons?

hi-steer
Tierod
full hydro
1 ton master cylinder
42 iroks
8 lug wheels
drive lines front/rear
welded diffs front/rear
discs on the rear


anything im forgetting?

Callen