Got the new cab swapped onto the frame, I also stripped off all the useful parts from the parts truck and we hauled the carcass to the dump, when we got it there we torched off the u bolts and took the axles, the new cab looks good on the short 4 runner frame, I am going to have to fab the 2 rear body mounts, I also identified what I am going to have to do to correct the steering, I am going to have to move the steering box 2.5 inches forward. I removed the shifters from the tranny and transfer case because the cab came from an Auto, when I get it back into my garage I will sawzall a hole big enough to fit the shifters, I also have to get a 1 1/8 inch hole saw and bore a hole for the clutch master cylinder. Big thanks for to Carl, Tony, and Kevin, I am going to go pick the truck up Monday after work so I can get into my garage and starting mounting all the stuff back on the firewalls, and getting it ready for the new front clip.
Finished the truss
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0012.jpg)
Getting Ready to load it on the trailer
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0022.jpg)
Moving the cab (it took 4 of us)
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0042.jpg)
bolting it down
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0072.jpg)
Looks pretty good
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0082.jpg)
front
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0092.jpg)
Whats left of the parts truck, now axles are gone frame is at dump
![](http://i141.photobucket.com/albums/r78/angler1979/TuRD0062.jpg)