Alright well.......I got my Proportioning valve kit from Frontrange yesterday and put the kit in today. First, let me say that the kit was a breeze to install. Super easy. The kit came with all the necessary hardware and fittings to make it a "plug and play" affair. I had the valve in and all the lines re-routed in a little less than 30 minutes. Sweet! So then after cleaning up my DOT mess in the engine bay I want to bleed the brakes as I have done so many times before. To my surprise I still could not get any fluid flowing to the rear brakes. I checked my work on the install and all is as it should be. Now I am thinking that I must have something wrong with the actual brake assemblies themselves. I guess I will have to take them apart and check them out. I find this a little weird since I didn't touch them in the first place. If they check out then I guess maybe my master cylinder?
![Think... :think:](https://board.marlincrawler.com/Smileys/marlin/think.gif)
But since I was able to bleed the LSPV before and not the rear brakes that wouldn't make much sense. Well back to the drawing board...and back to work.