toypcWell, got the exhaust done.  Took quite a while to make it happen. almost eight hours till I had the y pipe the way I wanted it.  It's all mandrel bent pieced together.  Snuck it right under the converter and joined it up with the driver's side down pipe.





Then it just barely fit between the floor board and skid plate.  I cut a hole in the cross member and ran the pipe right through it.  I stood the muffler on edge so the exit pipe was up high.  Then it runs and exits right next to the shackle.



Next day it was on to the interior to cover up the gaping hole in the floor board.  Also repaired some of the rust through on the passenger side.