no, just think when getting a body lift you are making a larger gap between the base of your auto shifter and where it is mounted to the body so therefor the shifter will be lowered by 2 inches (figuring that you are getting a 2" lift) and lowering that by 2 inches will will make it to where you will need to drop the entire shifter assembally by 2 inches. i would just take a sawzall and cut complety around the shifter assembally then put on the body lift then with it all together weld in a piece of sheet metal to cover up the 2 inch gap. and the shifter wouldn't do anything
![Thumbs Up :thumbs:](https://board.marlincrawler.com/Smileys/marlin/thumbs.gif)