i didn't clean the wiring up yet but here are the pics i took tonight. remove the drivers side parking light to gain access to the headlight wiring. the green wire is for the highs and the tan is the lows. all you need is a 30 amp relay and a power supply with a 30 amp inline fuse. plug the low beams into #86 pin, high beams into #87 pin, power into #30, ground into #85. tuck everything behind the parking lamps and your good to go. 

the third pic is the old highs, the fourth pic is the modified highs, and the last is the modified highs with two 55w offroad lights. you don't actually see farther, but it helps to see the little critters when you have the highs on. the lights on the shrub kinda help explain it. i was seeing red dots for awhile