« on: Jul 06, 2004, 07:02:15 PM »
you could cut a section out of the bumper so u can get to the frame crossmember. then weld a 1/4 in plate to it. and from the plate weld some bracing to the lower part of the crossmember
I had Rock Ware notch out my stock bumper in `99 for a standard winch plate and braced it to the frame and a cross member.
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
1991 Daihatsu Rocky, 3RZ-fe, Marlin super heavey duty clutch and pressure plate, Marlin W56-C-HD, duals, Marlin twinstick, three link front with Fox AirShox, 35's, Toy axles, 5.29:1, ARB F&R etc.