where you rubbing bad in the back when flexed out?
![](http://thexota.org/d/4178-1/0110_jpg.JPG)
Big time! I cut about an inch of the rear fender before the trip with the sawzal but it wasn't enough. I will need to trim another 2 inches at least to keep the tires off of the sheetmetal. But you have to remember, I pushed my WB out to 109". Most of that was in the rear.
When I step up to 36's, I will have to cut a ton to make them fit. I knew that when I started stretching the WB. I will also have to clearance the front firewall to clear 36's in the front. With the 33's, they are about an inch away from the sheetmetal at full stuff. I will cut the pinch seam and either pound or cut the firewall back as far as I can.