well heres what i did today with some 18 gauge cold rolled steel and a flux wire feed welder. dont laugh at the welds, its a 100 amp welder and doesnt go any lower, it burns through the thin stuff easily. i had to tack it and let it cool and tack it and let it cool, it took a while but it only cost 10 bux for the metal.
![](http://members.cox.net/84toyota4x4/repair%20floor%205.jpg)
ive still gotta do around the body mount and im going to clearance the inner fender/firewall for larger tires next.
heres what it used to look like
![](http://www.ovrrdrive.made2own.com/uploader/files/1/IMG_5434.jpg)