« on: Jan 29, 2006, 09:32:17 PM »
The live axle trucks were designed to be 4 wheeled 80% of the time.
IFS trucks were designed for a 20% duty time.
The IFS truck will ride better however, due to a lighter front end and the resulting wheel travel, by design the drive axles are subjected to greater angles resulting in more breakage in severe situations.
To run bigger tires off road, you need a lift. Check my used parts page for IFS lifts.
If the 88 has a 22R, you will notice a loss if power with bigger skins.
Hope the 88 is EFI, it would have better power and a stronger transmission.
Marlin
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
1980 Toyota - 1997 3RZ-FE 2.7l Engine, Turbo R151F 4.31:1, Triple Turbo Marlin Crawler Billet (2.28x4.70x4.70) = 1,148:1 Crawl Ratio, Marlin Crawler Twin Stick and Short Throw Shift Kits, 30mm H/D Output Shaft, High Angle Drive Lines, 5.29:1, ARBs, High Pinion Front, 25mm HD Billet High Steer Kit, 6 Pin Locking Hub Bodies, 86+ Wide Rear End, V6 3rd member, Chromolly Axles all around, 37" IROKs with Beadlocks, York onboard air - Rollbar air tank, Premier Power Welder, Marlin Crawler 4" USA-made Leaf Springs, Bilstein Shocks, et cetera....