0 Members and 7 Guests are viewing this topic.
I got a 1980 toyota 4x4 pick-up got the 20r four cylinder and the l43 tranny 4 speed. The l43 is no good. Like to put a 5 speed in it how hard is it?
Yes, the '82 trans would be a great upgrade Especially if it has the 80 mm front bearing.You will need to do a number of changes to install the trans.1. Two lower bellhousing bolts, they are longer.2. '81-'95 clutch slave cylinder. [Do not reuse the orginal fork return spring.]3. '81 and newer release bearing with collar and fork.3. Trim floor board as required to convert to the top shifting L52 trans. [The old L43 was a right hand, side shifting 4 speed.]4. To match the transmission output coupler, the oversized transfer case input splines will need to be ground for clearance.Marlin
Started by Trailtoy83 Toyota Pickup/4Runner Tech 1979-95
Started by awhotrods Project Research and Build-Ups
Started by 1980firstgen20r Transfer Case/Drive Line
Started by Oceana Transmission/Clutch
Started by OwenStrain Transmission/Clutch