Added 3 center supports the two sides are 1x1 1/4" and the center is 3/16" angle iron. I also added 2 peices of 3/16 plate they at least keep alot of stuff from flying through the expanded metal.
Also lifted the flatbed more with 4 more 1" body-lift blocks so basically it has a 2" lift now.
Added a bracket for the gas filler.
Side view I don't know if I want to keep the roll bar. I cut the legs but it turns out they are way too short.
I would have to lift the whole thing at least 4-5" to make it worth it.
Anyways it's getting there. I still need the side bars and a front bar.
