Hey guys I could use some opinions on setting up my shocks and bumpstops for the front. So im running A.P. 4" springs with 12" bilstein's. I cycled them through the best I could without breaking it down to just the main leaf. What I came up with was #1 on the shocks I have about 3" of shaft exposed and #2 on the bump stops just about a 2" gap between stop and the pad.
The shocks sound about ok I don't want to go thru the wheel well and shouldn't have to only running a 12" But on the stops only a 2" gap sounds a little small. I know how it kind of acts like a pivot point but.... I'm aware its going to very fro truck to truck and theres not one concrete answer but any Help or info would be awesome
Thanks