Also in the same boat as about 100 others. Chilkat mounts have my engine leaning 10° to the passenger side. Have a 3/8 thick washer in there for a spacer. And it's still at 5°
If you're using the Chilkat bracket you need 1" of spacer on the passenger side bracket and you'll have to remove the drive side engine mount cover shield. If you notch the passenger side bracket engine mount hole down towards the block an inch or so, you will be able to let the engine rock towards the passenger side and the engine mount stud will slide down into the chilkat bracket. It's actually easy to do yourself. I did it about 30 times trying to get it spot on.
I think it'd be easier for me to make a quick video explaining what we had to do.