Topic: Message #1087108

[mannysouza]

    I have been driving this around for a few weeks. I'ts so dam loud inside while driving I can't hear  while talking on my phone (yes I talk while driving.). I also needed to plumb, mount switches and wire up the lockers, install some beats, run the wiring for the lights and other odds and ends. So I pulled apart the whole interior. Since I'm doing an exo cage, I hate the drone associated with an exo cage, I used a knock off dynamat. I did the roof, back of cab, doors and fire wall. Huge difference when I close the door (Sounds solid). Should be a lot quieter inside. Still need to peel up the insulation and install it on the floor.
    I got the A/C working like a champ. Pretty nice since it's been a 100 degrees+/- for a long time here.
    I found a Hella wiring harness in my garage. It was for my prerunner. It has a dimmer switch built in. I'm going to see if it will work with the LED lights I got. If not I will bypass the dimmer with a switch.







Had a blow out on a brand new MTR.  There was no sidewall reinforcement in one section at all. It was replaced.



The sidewall was a 1/4" thick in this section.