What service parts are you on the hunt for? I'm sure we can point ya in the right direction
Mainly the upper knuckle stud kit:
https://www.marlincrawler.com/axle/front-axle-parts/front-hardware/hardware-front-hilux/12mm-upper-knuckle-stud-kitand
The 8mm hub stud kit:
https://www.marlincrawler.com/axle/front-axle-parts/front-hardware/hardware-front-hilux/8mm-hub-stud-kitI got the axle completely torn down today. Fabricated new turning stops and a new beefier steering stabilizer mount. Got all the welding done, soaked it in the solvent tank for a couple hours, flushed it out, and just dropped it off at the powdercoater.
I have a rush order on the Yukon diff rebuild kit, so hopefully that will arrive on Saturday and I can at least get started on piecing it back together.
QUESTION.......
The caster shims that were between the axle and the springs. Mine are about 1/4 thick (wedge obviously). Does that seem about right for this application? They are completely wasted (rusting REAL BAD, and before I make a new set, do you think those were the right ones or is there a reference and a parts supplier for those that I can double-check?
