:wave:Hi all;
I put a little more time in under the dash today,and found the flasher that runs the Emergency flashers,over beside the glovebox,IS actually marked "Turn Signal Flasher";I took it apart and found a circuit board and solenoid. The plug for it IS 3 blades,but the spacing's way too tight to use an aftermarket electronic flasher.
![Head Scratch :headscratch:](https://board.marlincrawler.com/Smileys/marlin/headscratch.gif)
At THIS point,I have to assume the same flasher relay works both circuits,since you can't use your turn signal and the 4 ways at the same time. Since the 4 ways still work fine,the problem must be either wiring or the turn signal switch;I doubt the wiring's at fault because I've found no visible or functional wiring damage anywhere else so far. If I can find a good parts truck,the turn signal switch is one of the things I'll need. (Other things I'll be looking for is an A/C compressor and brackets/hoses,the parts to convert to a stock P/S set up,a windshield and a tailgate. An OEM AM/FM radio would also be good,but I can live without it.) Well,on to the next fun project.
![Beer :beer:](https://board.marlincrawler.com/Smileys/marlin/beer.gif)
Speed