:wave:Hi all;
I put a little more time in under the dash today,and found the flasher that runs the Emergency flashers,over beside the glovebox,IS actually marked "Turn Signal Flasher";I took it apart and found a circuit board and solenoid. The plug for it IS 3 blades,but the spacing's way too tight to use an aftermarket electronic flasher.
At THIS point,I have to assume the same flasher relay works both circuits,since you can't use your turn signal and the 4 ways at the same time. Since the 4 ways still work fine,the problem must be either wiring or the turn signal switch;I doubt the wiring's at fault because I've found no visible or functional wiring damage anywhere else so far. If I can find a good parts truck,the turn signal switch is one of the things I'll need. (Other things I'll be looking for is an A/C compressor and brackets/hoses,the parts to convert to a stock P/S set up,a windshield and a tailgate. An OEM AM/FM radio would also be good,but I can live without it.) Well,on to the next fun project.
Speed