Ok here are some pics of the first set of brackets I made. Same basic dimensions as the final set.
The only modification I made on the final set was to cut down the second smaller piece to avoid interference with the body mount. In this pic, if you were to draw a line from the top left corner of the smaller piece (welded on top of the larger piece) to inside the bottom left corner by about 1/2" or so you'd be golden. OR just pay attention when designing them to avoid being like me
![Hammer :hammer:](https://board.marlincrawler.com/Smileys/marlin/hammer.gif)
(I just realized the brackets I originally posted shows the cut out part)
More hammers to the head
![Hammer :hammer:](https://board.marlincrawler.com/Smileys/marlin/hammer.gif)
CB
![](http://i1262.photobucket.com/albums/ii612/beersc/Bracket008_zps944ca1f4.jpg)
![](http://i1262.photobucket.com/albums/ii612/beersc/Bracket011_zps9def512e.jpg)
![](http://i1262.photobucket.com/albums/ii612/beersc/Bracket010_zps11fdeb97.jpg)
![](http://i1262.photobucket.com/albums/ii612/beersc/Bracket009_zps45982fbc.jpg)