« on: May 15, 2014, 03:00:10 PM »
Haven't figured it out yet.
I haven't had the time to trouble shoot much yet.
Gas Mileage is up from the E0. I have let the truck idle for 20+minutes. Definitely hits operating temp. Stays idling at 750-800rpm the way it should. But once I start driving the idle will jump to 1050-1100rpm under 'normal driving conditions'.
Same thing as before. If I gas the throttle (clutch in) up to at least 4500-5000rpm and let off the gas it will drop the idle to 750-800rpm. Once I start driving again the 'higher than normal' idle will resume.
My gut still wants to think it is something with the throttle cable or possibly fuel delivery. But I have thought about some of the other things you have looked at already, vacuum/air/exhaust leak of some type.
I'm sure I'll figure it out eventually. When I make headway, I'll update this post for certain.
Thanks for following up and keeping me aware of problems, lol!!
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
If I don't ask the stupid question, who will?
85 Runner, 22RE, AEM 'warm intake', TRD Cam, LC Headers, Dual Case, 5.29's, ARB Front Locker, Detroit Rear Locker, 35's, V6 Brakes, ARP Studs, Marlin Arms/Caps/Hy-Steer, Winch, Armor, Can-Back Top....and...
...more Gremlins than Gizmo the Mogwai was responsible for.