Last is the front fender. The frist picture is the inner wheel well where your feet are suposed to go. I moved it back all the way to the body mount. I have a few spots to weld up and clean before it is done. The next picture is the fender. Sorry for the somewhat blurry picture, best I have of it with my cell phone camera. It is almost all welded up and cleaned just a few more spots and some slight body work and paint and it is done. Then do it all over again for the drivers side. Pictures just don't do this justice for how much it opens it all up. I have some 31 inch rollers on there now and with only a 2 inch lift and the wheel wells they look like tiny sedan tires.