Ok so maybe what I said wasen't so clear. A proressive spring like a leaf that is soft in the beginning and stiff in the end doesnt work well with a flutter, which is also soft in the beinging and stiff at the end. Because typically when the spring gets stiffer you dont want to also get stiffer on compression valving. That makes for a harsh ride. Stiffer spring requirer softer compression stacks and vise a versa.
Leaf springs typically have higher rebound rates than a coils not lower. If the typical leaf spring is sprung at 220lbs per inch and at least my typicall coil is 94lbs which is higher.
Softer compression rates of the spring require stiffer compression valving. Stiffer rebound rates require stiffer rebound valving. In the end a spring with high compression rates also has high rebound rates. Ramping up in spring rate "IS NOT" beneficial for high speed racing. You need to keep the spring the same and progessively stiffen the shocks compression rates to handle better.
Okay I getcha that makes sense. since the coil spring rate is soo soft it needs quite high compression and quite low rebound compared to a leaf spring which has a much higher rate.
IF the leaf spring were the same rate it would need a bit less compression because its going to be progressive and the rebound will need to be less due to interleaf friction correct?
this is very general I just want to make sure i'm understanding.