Author Topic: stuck differential plug  (Read 1250 times)

0 Members and 1 Guest are viewing this topic.

donutslayer

  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Posts: 11
  • Member since Sep '13
  • Crawling with Marlin
stuck differential plug
« on: Sep 19, 2013, 02:43:20 PM »
I am not sure if this goes here in this part of the forum or in the differential section since this could apply to multiple areas. I have a stuck differential filler plug. Normally if I was just an ordinary stuck bolt I would douse it in a little penetrating oil then a bit later get after it with a torch. However I am a little concerned to hit the plug with heat. Any suggestions here?

H8PVMNT

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 451
  • Male Posts: 3,503
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: stuck differential plug
« Reply #1 on: Sep 19, 2013, 02:50:43 PM »
Worst ones in the past I have welded a piece of rod to as a breaker bar, then you can usually get them out no problem. It gives you the heat and something to grab it with all in one motion.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

 "I'm jealous of your shop. It has concrete and doesn't smell like pickles like the old shop  "  300K

donutslayer [OP]

  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Posts: 11
  • Member since Sep '13
  • Crawling with Marlin
Re: stuck differential plug
« Reply #2 on: Sep 19, 2013, 02:58:54 PM »
I definitely never thought of that one. Unfortunately I do not have a welded I wonder if I  could epoxy a rod to it. I guess I could always take it down to the local weld shop

H8PVMNT

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 451
  • Male Posts: 3,503
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: stuck differential plug
« Reply #3 on: Sep 19, 2013, 07:05:18 PM »
I'll bet a liberal amount of JB weld would work as long as you make some grinder marks for it to bond to.  I would probably heat it up too.  It would be fun to see if it works anyway...

Rod stock, an old wrench, whatever seems to fit the occaision.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

 "I'm jealous of your shop. It has concrete and doesn't smell like pickles like the old shop  "  300K

locked 4x4

  • Offline Crawler Guru
  • ****
  • Turtle Points: 0
  • Male Posts: 466
  • Member since Aug '09
Re: stuck differential plug
« Reply #4 on: Sep 19, 2013, 07:44:07 PM »
id go for the welding shop

Slolyfe

  • Offline The 2K Group
  • ***
  • Turtle Points: -117
  • Male Posts: 2,048
  • Member since Aug '07
  • Heyo
Re: stuck differential plug
« Reply #5 on: Sep 19, 2013, 07:47:41 PM »
Don't put them in so tight...

Is it stripped? Use a cheater bar or pipe wrench.
You'll never take me alive

donutslayer [OP]

  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Posts: 11
  • Member since Sep '13
  • Crawling with Marlin
Re: stuck differential plug
« Reply #6 on: Sep 23, 2013, 06:28:44 PM »
Thank you for your help, it finally came off after hitting it with the torch and PB Blaster.

BigMike

  • Administrator
  • Online Gold Turtle Award
  • *
  • Turtle Points: 1566
  • Male Posts: 17,955
  • Member since Apr '02
  • 511:1 Club
    • Bone-Stock Plane-Jane 1981 Shortbed Pickup
Re: stuck differential plug
« Reply #7 on: Sep 23, 2013, 07:55:53 PM »
Another trick could be to use a Dremel to cut a ridge into the side of the plug facing the counter clockwise direction, and use a hammer and a flat head screw driver or dull chisel on this ridge to hammer and slowly rotate the plug out.

Mike
New Instagram: @SlowestTacoma

Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Triple T/Case 3rd gen Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

mudmaster

  • Offline The 2.5K Group
  • ****
  • Turtle Points: 2550
  • Male Posts: 2,659
  • Member since Feb '05
    • Buy me a beer
Re: stuck differential plug
« Reply #8 on: Sep 24, 2013, 11:09:34 AM »
I've used an air chisel.........
Time to go wheelin!

 
 
 
 
 

Related Topics

6 Replies
1151 Views
Last post Nov 14, 2005, 07:50:55 PM
by MidgetMike
3 Replies
1057 Views
Last post Jun 08, 2006, 06:44:40 PM
by Plowking
33 Replies
5721 Views
Last post May 28, 2007, 12:55:28 PM
by DTB
21 Replies
2637 Views
Last post Mar 17, 2009, 10:33:05 AM
by Wermz84
6 Replies
1064 Views
Last post Sep 11, 2011, 02:28:47 AM
by Rocksurfer