Author Topic: thinking about doing a walk thru  (Read 1942 times)

0 Members and 1 Guest are viewing this topic.

98runner chevota

  • Offline Rock Master
  • ***
  • Turtle Points: -100
  • Male Posts: 361
  • Member since Dec '02
  • PoP pOp Fizz fIZZ oh it must be a BIRF. It is!!
    • PortlandBusinessGraphics.com
thinking about doing a walk thru
« on: May 20, 2003, 03:02:16 AM »
:reg: :~~:Well I am thinking of doing a walk thru on my 85 toy so that the little one will have a place to sit. Has anyone done this and do you have any pics. I am going to do an exo cage and all the rest of the fun steel bar protection but have wondered if there is anyone that has done this and if there are any structure issues. I have done this to alot of minis (slamed) truck in the past but with the amount of abuse the 4x takes is it STRONG enough to take the abuse.  :help: ???
« Last Edit: Dec 31, 1969, 04:00:00 PM by 1056988800 »
1998 4runner with 4.3 liter Chevy vortex/ turbo 400/ 205 tcase/ hi pinion 44 up front with 4.88 arbs front and rear/ rear is a turbo with 4.88s/ 63" Chevy's in rear with 5 in Chevy's in front/

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1357
  • Male Posts: 22,604
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • HotSprings Superlift ORV park
Re: thinking about doing a walk thru
« Reply #1 on: May 27, 2003, 12:00:15 PM »
i cant see a problem , esp with the exo cage, but you might want to use a flexible transition  joint like used on the sleepers of big trucks,  that would let the bed and cab  flex independently without binding

just go to a truck dealer,  kenworth or freightliner and tell them you need the flexible rubber thing that goes between the  truck cab and sleeper compartments :chug:
« Last Edit: Dec 31, 1969, 04:00:00 PM by 1056988800 »
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

98runner chevota [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -100
  • Male Posts: 361
  • Member since Dec '02
  • PoP pOp Fizz fIZZ oh it must be a BIRF. It is!!
    • PortlandBusinessGraphics.com
Re: thinking about doing a walk thru
« Reply #2 on: May 27, 2003, 04:05:17 PM »
Thanks for the info. I am going to use I think the boot like on a camper shell. Im not 100% sure of what I am doing just yet to the truck or if I am going to make is solid like a Runner
« Last Edit: Dec 31, 1969, 04:00:00 PM by 1056988800 »
1998 4runner with 4.3 liter Chevy vortex/ turbo 400/ 205 tcase/ hi pinion 44 up front with 4.88 arbs front and rear/ rear is a turbo with 4.88s/ 63" Chevy's in rear with 5 in Chevy's in front/

 
 
 
 
 

Related Topics

12 Replies
1660 Views
Last post Aug 26, 2008, 08:46:49 PM
by Shamb
28 Replies
6958 Views
Last post Mar 18, 2012, 08:24:33 PM
by superyota
31 Replies
8815 Views
Last post Jun 25, 2012, 06:16:28 PM
by dropzone
14 Replies
2677 Views
Last post Mar 19, 2015, 02:46:21 PM
by superyota
106 Replies
22109 Views
Last post Apr 10, 2017, 07:56:21 AM
by knucklebuster