Author Topic: Twisted's 85 EFI 4Runner  (Read 117785 times)

0 Members and 2 Guests are viewing this topic.

twistedtoy92

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
yeah i would say so! haha       hey man sorry i havnt sent you the pic of that flat pitman arm yet.  I keep spacin it out and i'm felling kinda shitty tonight so im not going to go out and get a pic.   hopefully i will get you one tomorrow..... are you in a hurry for it?

yeah no big hurry, its going to be another two months before I get the engine built unless I get that insurance check pretty soon. Whenever you get a chance, I need to set up another paypal too, I havent used mine in a long time and dont remember my login :pokinit:

i dont think any toyota wraps up that high stock.
i wanna hear some videos. lol
you gonna put the stock exhaust on it?

I've had mine over 6200 a few times.... Its got a pacesetter header, 2 1/4'' to a flowmaster 40 series back to a 2 1/2'' tip. It breaths nice :beerchug:

I was going to post up more pics but I was tired as hell last night, I started working on the front hanger yesterday.. I'll post up later
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
well i picked up some metal Monday and got this done









Pressed out old stock bushings





























2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
I'm gonna have my buddy machine four 3/8'' thick spacers for me to install on the upper shackle bolts to even the shackles up with the chevy spring width.

All that is left with the rear is:

-Install Marlin spring perches
-Finish welding up shackle hangers and rear frame boxing
-Setup/install bumpstops
-Install spacers for shackles
-Install Bilsteins
-Trim fenders
-Tub inner fenders
« Last Edit: Jul 23, 2011, 06:33:04 PM by twistedtoy92 »
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
Well I've been extremely busy at work with a few major in-frame engine jobs so I haven't touched the runner for a few weeks. But I will get a nice chunk knocked out these next two weeks.

I got my pistons, rings, rods/mains/thrust bearings (clevite), LCE Pro Torquer Cam and adjustable cam gear ordered so the engine work should progress quite nicely this next month as well! Hopefully I'll be able to drive this thing sometime mid July... but we will see what life throws at me!

:beerchug:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

pumkin toy

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -4
  • Male Posts: 3,561
  • Member since Sep '05
  • Do You Know A Sweeney Bro?
    • View Profile
    • Buy me a beer
hopefully you get the time to build that engine man!
97 4runner Limited
4runner Build Thread http://board.marlincrawler.com/index.php?topic=54076.1410#lastPost

Started my own fab business recently check out the website  www.c4fabrication.com

also follow C4Fab on facebook for regular updates on projects. http://www.facebook.com/pages/C4-Fabrication/454285357953823

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
oh i did start on the rear fender trimming and body work, had a nice chunk of bondo and some rust to cut out. its gonna be fun finishing that :pokinit: up... also a pic of the 5/16'' thick SS spacers for my shackles my buddy machined for me.











2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
hopefully you get the time to build that engine man!

yeah once I get the bearings and pistons I can mock up my block and see how much I want to deck then send it back over to the machine shop.
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
few updates, got the front hanger built and installed, moved the front axle forward a few inches







































2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
front will level out just right once I get the engine dropped in. Stay tuned, this project just got kicked into high gear :yupyup:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

86bobbedtoy

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 686
  • Male Posts: 3,938
  • Member since Oct '06
    • View Profile
sweet!
I like the hanger!!

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -415
  • Male Posts: 4,823
  • Member since Jun '07
    • View Profile
    • Buy me a drink
that hanger is obnoxious lol, looks good though man.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
that hanger is obnoxious lol, looks good though man.

i know what you mean.... but itll look way better once I get the front bumper incorperated into it :yupyup:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

pumkin toy

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -4
  • Male Posts: 3,561
  • Member since Sep '05
  • Do You Know A Sweeney Bro?
    • View Profile
    • Buy me a beer
lookin good man!  looks like it sits pretty low
97 4runner Limited
4runner Build Thread http://board.marlincrawler.com/index.php?topic=54076.1410#lastPost

Started my own fab business recently check out the website  www.c4fabrication.com

also follow C4Fab on facebook for regular updates on projects. http://www.facebook.com/pages/C4-Fabrication/454285357953823

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
thanks man! thats about as low as I can go with the leafs..... :yesnod: should be nice and stable. I got the flat pitman arm in the mail today, thanks a ton for that!  :biggthumpup:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
I should have my block back from the machine shop along with my rods mid next week then I can start assembling the engine. Shouldn't be too much longer and it will be running order  :yesnod:  still another month or so until all of the axle stuff will go in but I need some road time anyway to break the engine in before I take it out for a true shake down  :eyebrow:

(Engine Stuff)

-LCE Pro Air Intake kit
-Big Bore TB from LC
-NGK Iridium spark plugs
-NGK wires-Dist. cap & rotor
-LCE spark plug wire bracket
-Alt. belt & P/S belt
-Fuel filter-180 thermostat
-Radiator cap & silicone hoses


(Steering Stuff)

-Drill and tap box for hyrdo-assist
-8'' travel hydraulic ram, hoses and mounting brackets
-3/4'' heim joints and hardware
-1 1/2'' .250'' wall DOM
-Marlins 25mm hardware
-ARP knuckle studs
-ARP hub studs
-Longfield 30 spline


« Last Edit: Dec 30, 2011, 03:10:17 PM by twistedtoy92 »
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
Got my block, crank and rods back from the machine shop finally....:woohoo: Everything looks really good! I havent had time to touch it yet, too damn busy at the shop... havent had a day off since a few weeks ago so I am taking tomorrow and monday to relax then I'll get my engine built next weekend and finish up all the welding and whatnot on the front end before I put the engine in... Hopefully a couple more weeks and I'll actually get to fire this thing up :crossed:  :driving: :burnout:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
should be picking up an MC07 R10 XD 23 spline adapter brand new in box for $200 next paycheck... Can you say SCORE? :yupyup:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
well I went out to check out the runner and think about further progress today on my smoke break when I noticed someone backed a truck trailer into my rear tire..... Just about punctured the tire and took 1/16'' out of the wheel.... Moved my runner about 2 feet... this is $376.91 for the rubber and $59.95 for the wheel.... Im pretty sure I know which customer backed into my rig, I will find out and get a new tire/wheel.  :down:







2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -415
  • Male Posts: 4,823
  • Member since Jun '07
    • View Profile
    • Buy me a drink
WOW someone needs to learn how to drive of give up the driver seat
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

Zs Confederate Toy

  • Offline The 1K Club
  • *
  • Turtle Points: 2
  • Male Posts: 1,146
  • Member since Mar '11
    • View Profile
    • Buy me a beer
Dude that sucks. I would hate to see that on my smoke break
ZACH
87 Rock Rat X
80 SR5 The Shady Lady
Trail Junky

86rustbucket

  • Offline The 1K Club
  • *
  • Turtle Points: 45
  • Posts: 1,328
  • Member since Jun '09
    • View Profile
    • Buy me a soda
Ouch!    I guess the "sorry note" with his insurance info must have blown away in the wind.  :dunno:

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
Yeah that's not how Id like' to spend my smoke break on a Saturday morning after working for free for two days....  :maddest: My service writer is supposed to get a hold of the guy today and figure something out... On the other hand though I made some progress on my engine today, crank is in and all 4 pistons! Pistons sit .006'' above the block deck at TDC which is exactly where I calculated them to be :greengrin: happy about that! The machinist took .014'' off the block to achieve this.
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
Couple pics





2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -415
  • Male Posts: 4,823
  • Member since Jun '07
    • View Profile
    • Buy me a drink
reason for .014 off? i know its to achieve .006 above the deck with the pistons at TDC.
reason is? :]
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

Zs Confederate Toy

  • Offline The 1K Club
  • *
  • Turtle Points: 2
  • Male Posts: 1,146
  • Member since Mar '11
    • View Profile
    • Buy me a beer
Looks good. I am gonna be doing this same thing here soon.
ZACH
87 Rock Rat X
80 SR5 The Shady Lady
Trail Junky

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
reason for .014 off? i know its to achieve .006 above the deck with the pistons at TDC.
reason is? :]

Yes, raise the compression. :yesnod:

Looks good. I am gonna be doing this same thing here soon.

Thanks!  :greengrin:

 I got a little bit done today, gasket matched/ported the intake ports in my head and cleaned it all up . Tomorrow I am going to paint my block, install my LCE pro rocker shafts and new Toyota rocker arms with new adjusters, LCE Pro torquer cam, LCE adjustable cam gear, ARP head studs, factory Toyota head gasket and get the head torqued down. After this happens things should progress quite nicely! Should have the engine finished sunday evening then next week I will hammer out all my grinding and welding on the frame. Then the LCE 35 lb flywheel, Marlin SHD Ceramic 1800 lb competition clutch bolted up and engine dropped in. Wanna have it running by the 20th-21st.... just gotta bust ass on it!
:beerchug:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -415
  • Male Posts: 4,823
  • Member since Jun '07
    • View Profile
    • Buy me a drink
thats awesome dude. you dont mess around. whats the compression gonna be?
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
Thanks! Should be around 10/10.25:1 compression... I got the block painted and the timing cover painted... Didnt touch anything else..... I'm a little wore out, a lot of big engine work lately at the shop.....putting main/rod bearings and an oil pump in a Cummins ISX.... Mains are almost 4'' in diameter..... Ill post pics up later...



2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

twistedtoy92 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -255
  • Male Posts: 3,781
  • Member since Dec '06
  • NFM Customs
    • View Profile
didnt touch it tonight.... to much damn work to do and its burning me out. Not going to get rushed on building this engine. here are a couple pics:



2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

Zs Confederate Toy

  • Offline The 1K Club
  • *
  • Turtle Points: 2
  • Male Posts: 1,146
  • Member since Mar '11
    • View Profile
    • Buy me a beer
That lime green looks  :boobs: I like it!
ZACH
87 Rock Rat X
80 SR5 The Shady Lady
Trail Junky

 
 
 
 
 

Related Topics

1 Replies
1941 Views
Last post Apr 13, 2004, 12:28:26 AM
by 84runner
4 Replies
2615 Views
Last post Dec 08, 2007, 09:59:42 PM
by twistedtoy92
0 Replies
3438 Views
Last post Dec 05, 2009, 06:23:47 PM
by chim
34 Replies
19969 Views
Last post May 06, 2017, 04:38:31 AM
by Someday
4 Replies
2487 Views
Last post Sep 06, 2010, 09:25:22 PM
by lug nut