Author Topic: Looking to get a new Plasma Cutter  (Read 1426 times)

0 Members and 1 Guest are viewing this topic.

DeadlyPeace

  • Offline Crawler Guru
  • ****
  • Turtle Points: 1
  • Male Posts: 593
  • Member since Nov '07
  • HEAVILY medicated for your protection!
    • ToyotaOffRoad
Looking to get a new Plasma Cutter
« on: Nov 26, 2007, 11:46:34 AM »
Hey all, I was looking to get a new Plasma Cutter. Was thinking about a Miller Spectrum 375 X-TREME, but just for shits and giggles I was checking the prices of them on ebay and came across this one from Longevity Entertainment. I've never heard of them and was wondering if any of you have and/or know anything about them. Can't find any website or company information other then what is on ebay. Here a link.
http://cgi.ebay.com/NEW-LONGEVITY-CUT60D-60AMP-PLASMA-CUTTER-110-220V-CUT60_W0QQitemZ280176936909QQihZ018QQcategoryZ113743QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Any info is appreciated, TIA.
I REJECT YOUR REALITY AND SUBSTITUTE MY OWN

Never let people think you’re a horrible person and always keep the heart of a young child…
       ...I prefer mine in a jar on my desk.

 
3 CAT scans a MRI and some time with the shrink and it's comfirmed. I'm just not right in the head.

Global Moderator for www.ToyotaOffRoad.com

Homefries

  • Offline Rock Master
  • ***
  • Turtle Points: 1
  • Male Posts: 241
  • Member since Apr '07
Re: Looking to get a new Plasma Cutter
« Reply #1 on: Nov 27, 2007, 08:18:22 PM »
Haven't heard anything bad about them.  A 40 amp model can cut up to 5/8"  so a 60 amp could cut up to 1" thick material if needed.  A couple of welding supply shops around here have them in their store.  For the price its not bad.  :twocents:

NorCalToy

  • Official Super Badass
  • Offline The 2K Group
  • ***
  • Turtle Points: 59
  • Male Posts: 2,472
  • Member since Jun '07
  • IFS no longer! - Member #8342
    • Buy me a beer
Re: Looking to get a new Plasma Cutter
« Reply #2 on: Nov 27, 2007, 08:19:50 PM »
did you buy it?
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

ninja turtle

  • Offline The 1K Club
  • *
  • Turtle Points: 37
  • Male Posts: 1,074
  • Member since Sep '07
Re: Looking to get a new Plasma Cutter
« Reply #3 on: Nov 27, 2007, 08:46:03 PM »
never heard of'em but that miller 375 kicks butt.

DeadlyPeace [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: 1
  • Male Posts: 593
  • Member since Nov '07
  • HEAVILY medicated for your protection!
    • ToyotaOffRoad
Re: Looking to get a new Plasma Cutter
« Reply #4 on: Nov 27, 2007, 09:14:41 PM »
Haven't heard anything bad about them.  A 40 amp model can cut up to 5/8"  so a 60 amp could cut up to 1" thick material if needed.  A couple of welding supply shops around here have them in their store.  For the price its not bad.  :twocents:
Thanks for the info. Have you ever happen to see one of them in action.
It's a much nicer price and seems like really nice equipment, but I still hate paying for junk and then having to pay them more to fix what shouldn't have needed fixing. Looking at their feed back they've had this problem. 


did you buy it?
No. As I mention I never heard of the company Longevity Entertainment and wanted to see if anyone else has or knew anything about them. I'm still thinking of it though, but not sure. Right now I'm waiting on a reply from them on their return policy.

never heard of'em but that miller 375 kicks butt.
Yeah it seemed like a good one and I've used some Miller equipment and like how they worked. I usually lean more toward the Lincoln company, but the Miller spectrum 625 just seemed to have more of what I wanted and a little better price.


I REJECT YOUR REALITY AND SUBSTITUTE MY OWN

Never let people think you’re a horrible person and always keep the heart of a young child…
       ...I prefer mine in a jar on my desk.

 
3 CAT scans a MRI and some time with the shrink and it's comfirmed. I'm just not right in the head.

Global Moderator for www.ToyotaOffRoad.com

Homefries

  • Offline Rock Master
  • ***
  • Turtle Points: 1
  • Male Posts: 241
  • Member since Apr '07
Re: Looking to get a new Plasma Cutter
« Reply #5 on: Nov 28, 2007, 02:06:21 PM »
I talked to a couple of buddies of mine that have friends that have these and they haven't had alot of problems with their units.  When they did have a problem they called or emailed and got a quick response back and payed very little to a free exchange for whatever was broken.  You pay for what you get, so it's kind of a gamble if you want to take the chance  :dunno:

MiniSimp

  • Outdoor Enthusiast
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 5
  • Male Posts: 5,119
  • Member since Jan '05
  • SimpsonBrothers.net
    • Simpson Brothers Photography
Re: Looking to get a new Plasma Cutter
« Reply #6 on: Nov 28, 2007, 02:12:52 PM »
Don't buy the Thermal Dynamics Drag-gun, it sucks ass.
I recommend the Hypertherm or Miller

 
 
 
 
 

Related Topics

1 Replies
1021 Views
Last post Apr 20, 2011, 10:32:07 PM
by toyota castine
6 Replies
6727 Views
Last post Mar 20, 2011, 04:38:09 PM
by yotaneck13
6 Replies
1481 Views
Last post Sep 06, 2010, 04:00:53 PM
by AaronB
0 Replies
693 Views
Last post Feb 26, 2011, 08:42:57 PM
by JanMarie13
14 Replies
4021 Views
Last post Aug 16, 2014, 11:57:49 PM
by skyscraper