0 Members and 5 Guests are viewing this topic.
.... Plan is for exo in the future. ....
OH NO..... NOT AN EXO!!! Please don't do it! Gnarls.
You can fix the stock temp gauge...https://board.marlincrawler.com/index.php?topic=47792.msg599053#msg599053google 'Toyota temp gauge mod'
How come you don't like em?
I plan to copy this almost exact.
All I could find was information for 93 and up, nothing at all for second gens.
Right, but without a lot of potentially destructive testing I can't know if I have to vary the resistance values or not
There is no temperature reading.
Make your own temp marks...………..
"Make your own temp marks...". Gnarls.
holy crap that fan clutch was cheap!! nice find!CB
You can change the fluid in the aisin fan clutches...………….
Side question. Does everyone install their intake gaskets dry? Or with sealant?
Not worth the hassle. I'd rather pay $40 for a new one.
I like to use that copper spray adhesive/sealant on something like an intake. It has worked good for me.
I installed mine dry.. .no gasket sealant. I don't know what the "Pros" do or recommend.The bolts and nuts will need to be checked and rechecked after installation to keep tight.Gnarls.
Started by yota_krawler Project Research and Build-Ups
Started by nicholas99350 Project Research and Build-Ups
Started by Toyospearo « 1 2 » Toyota Pickup/4Runner Tech 1979-95
Started by Doable Project Research and Build-Ups
Started by Jason E. « 1 2 » Project Research and Build-Ups