Author Topic: Looking for complete or semi-complete 4runner or doublecab  (Read 1399 times)

0 Members and 1 Guest are viewing this topic.

Marsheezy

  • Offline Dusty Trails
  • *
  • Turtle Points: -49
  • Posts: 4
  • Member since Feb '16
  • Crawling with Marlin
Hello,

Looking to buy a completed rig. Have a kid on the way and need to upgrade from my current 2-seater rig. Looking for a well-built, street-legal, 84-89 4runner located in Norcal. Would like to drive from Sacramento to the trail and home. Budget between 7k-10k but could talk higher prices for the right rig.

Also interested in the older landcruisers too.

ExCabSwap

  • Offline Crawler Guru
  • ****
  • Turtle Points: 1012
  • Male Posts: 675
  • Member since Jan '16
  • 3rd Gen ExCab Swap!
    • Buy me a soda
There's a guy selling his runner for 1300... I know you said the 1st gen is desired, but with the left over 6k-9k you could have an extremely well built, capable rig with the accouterments of the 2nd gen runner and the capabilities of a SAS... Just a thought... http://board.marlincrawler.com/index.php?topic=100057.0
1993 Standard cab chassis. 1989 Extended Cab. 22R-E BO .020, ENGNBLDR 261c cam, Doug Thorley Tri-Y header, Straight Pipe through a Flowmaster 40, ARB Rear Locker, York OBA with fabricated bracket.
Projects waiting in my shop: '83 Front Axle, TG Sliders, second tcase, NEW: XD 4.70 gears!

helipilot77

  • Offline The 1.5K Club
  • **
  • Turtle Points: 954
  • Male Posts: 1,526
  • Member since Jul '12
  • Seattle, WA
    • My build thread
Zippo is selling his 1st gen 4Runner. It is a meticulously built rig that we worked on building together over the last few years. He is looking to start a new FJ-40 project and is asking $10,000. Has a clean 5VZ swap, dual cases, and pretty much everything else. Here is a link to his build thread:
http://board.marlincrawler.com/index.php?topic=96772.570
-1987 SR5 4runner, 1KZ-te turbo diesel with custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My build thread http://board.marlincrawler.com/index.php?topic=98969.0
-My front axle service write-up http://board.marlincrawler.com/index.php?topic=97311.0[/ur

Marsheezy [OP]

  • Offline Dusty Trails
  • *
  • Turtle Points: -49
  • Posts: 4
  • Member since Feb '16
  • Crawling with Marlin
@helipilot77
Thanks for the thoughts but I'm not going to have much time to work on a truck so looking for something much more complete.

@pgragg
That's a good looking build but it looks as though Zippo is in Washington. Am I wrong? That wouldn't be the easiest acquisition. Hoping to find something closer to home and CA smogged.

CCM Runner

  • Offline Rock Master
  • ***
  • Turtle Points: -10
  • Male Posts: 243
  • Member since Mar '06
  • brrop!
1988 4Runner sasd on 37 iroks and 17"allied beadlocks.
Front axle 27spline longs, high pinion 529s with a Detroit, hydro assist.
5 speed w56 trans, dual transfer cases 4.7s in the rear and stock in the front on a custom crossmember.
V6 rear 3rd with new Yukon 529s and a Detroit.
Full interior cage Dom 1 3/4 tubing, beard front suspension seats and a mastercraft rear bench
All pro springs and fox shocks on all four corners
Full size spare
Optima yellow top
Rock lights
Warn 9.5 winch
Tube bumpers and sliders
New timing chain, oil pump, brake master cylinder
New marlin clutch, knuckle rebuild kit not installed
And much more I'm forgetting

Located in nipomo ca near pismo beach
$9800 Obo consider trades
get a bigger hammer!!!!!!!!

 
 
 
 
 

Related Topics

3 Replies
1260 Views
Last post Nov 24, 2005, 07:13:51 AM
by UNBREAKABLE
31 Replies
3114 Views
Last post Feb 08, 2008, 08:25:48 PM
by cruiserfj45
0 Replies
442 Views
Last post Jul 16, 2009, 08:20:08 PM
by dem
16 Replies
2013 Views
Last post Mar 20, 2011, 08:54:45 PM
by bigbowen1
1 Replies
557 Views
Last post Apr 05, 2018, 12:18:46 PM
by 90 sa-yota