Marlin Crawler - Online Forum

Technical Discussion => General 4WD Discussion => Topic started by: pitter on Jun 18, 2003, 05:47:40 AM

Title: G58 and dual cases
Post by: pitter on Jun 18, 2003, 05:47:40 AM
well i went to put dual cases in my 93 4cylinder 5 speed and i figure out that there is no was my 21 spline carb case will work with my tranny.... is there a way i am missing or ? if i will be changing trannies.. my dual cases already has a carb case from a 84-88 truck setup as the first case and i have a top mount for the rear... so will my cluch and stuff from my tranny work with a G52? and what do i do about a speedo now?  :sob: i guess i wont be wheelin anytime soon :smack:
Title: Re: G58 and dual cases
Post by: pitter on Jun 18, 2003, 05:48:18 AM
?
Title: Re: G58 and dual cases
Post by: BigMike on Jun 18, 2003, 06:57:49 AM
You'r carb case needs to be a 89-95 Forward shifting case. The early 84-88 carb cases have longer rods that will not work with your 93 transmission.

No, the clutch and flywheel of the 93 setup will be larger than those used on the G-trans.
My advise would be to simply change the two shift rods on your Crawl Box to 89+ rods and then your set.

Regards,
BigMike
Title: Re: G58 and dual cases
Post by: pitter on Jun 23, 2003, 01:32:46 AM
i called marlin and found out i have a 26 spline t case so i need a new tranny that has a 21 spline output. or buy a v6 adapter and they will include a taco 2.7 coupler and then i need a 23 spline t case :unhappy:.... or i guess any tranny that bolts to a 22re and will work.... g52. w56...but then i may have to re-do my crawler box for the dual cases.