Author Topic: 03 quad cab SAS  (Read 34474 times)

0 Members and 1 Guest are viewing this topic.

bullcrew

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
03 quad cab SAS
« on: Jan 16, 2015, 10:29:28 PM »
Went and picked up a project that has a partially finished front end.... on trailer with some boxxer parts we headed back to shop...


27" frame to ground but the has NO road time s not broken in Yet..
.
03 quad cab
Toy rear with e-locker with solid opinion spacer
Rock assault 5" over front housing
5:29 gears
Detroit Locker front
Tundra 231mm front brakes with fror brackets
Skys manufacturing billet pitman arm
Trail gear 3" SAS
Creeper rear joints
 Bilstein shocks
6 shooter knuckles,
Trunion bearing eliminator kit
Long field 30 spline
Long field outputs
 Trail gear hydro assist
1650 pump
2x8" ram
Abs eliminator
Square tube front shaft
Dual cases
Hid headlights
Warn 9.5 CTI winch
Large capacity aluminum radiator so its above the frame rails
Electric fan
Tg bumper
All pro sliders
Raceline bead locks
MTR Kevlar 37" tires
ARP studs
Upgraded hub studs
Ifs box
Plated frame front and rear
High steer set up
Wilwood brake proportioning valve


Of the parts listed I'm down to finish.... this week
Hydro assist dual cases and trunion bearing eliminator this weekend

Front was almost finished so ripped into it Monday and between jobs got to this point....











There's plenty of time to rest when your dead or knocked out

jimbo74

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1442
  • Male Posts: 8,705
  • Member since Sep '05
Re: 03 quad cab SAS
« Reply #1 on: Jan 16, 2015, 11:26:23 PM »
looks awesome! I would love to have that truck!
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #2 on: Jan 17, 2015, 07:08:35 AM »
looks awesome! I would love to have that truck!

Thanks... :thumbs:
Its what I ultimately wanted....
I bought the hydro assist, dual case connector, trunion eliminator, winch, hid's, and race lines...the rest was in boxxes....so that made it the perfect truck for me.....extremely clean start to front no crap welds or junk so made it easy for me to complete and continue...didn't have to go back and redo his stuff...,
There's plenty of time to rest when your dead or knocked out

1985CRAWLER

  • Offline The 1K Club
  • *
  • Turtle Points: 267
  • Male Posts: 1,171
  • Member since Feb '13
  • Backyard Built
Re: 03 quad cab SAS
« Reply #3 on: Jan 17, 2015, 09:06:24 PM »
this is awesome, and yea id like to have it as well!

nice clean build!
low n' slow 85 runner SR5 22re,rcvs ,Duals,5.29s,Detroits f&r,40s,RUF,Chevy 63 rears,Armored,Cage

bobbed and beat 91 ex cab,3RZ swapped,dual ultimates, dana 44 sas 5.38/5.29 combo,37s, RUF, 63 rears,ARB front, detroit rear,cage

http://board.marlincrawler.com/index.php?topic=96250.msg1073007;topicseen#msg1073007

http://board.marlincrawler.com/index.php?topic=26920.390

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #4 on: Jan 17, 2015, 09:53:46 PM »
Thanks guys...yeah I'm pretty jazzed ....it gets smogged tomorrow and will be my daily driver come Tuesday....so I will continue to build it and cage it or armor....

I build a lot of jeeps and personal Toyotas this is by far my favorite....
There's plenty of time to rest when your dead or knocked out

MRHilux87

  • Offline Crawler Guru
  • ****
  • Turtle Points: -306
  • Male Posts: 425
  • Member since Apr '11
Re: 03 quad cab SAS
« Reply #5 on: Jan 18, 2015, 10:53:05 AM »
Can I ask what you paid for it?  That is the perfect project. 
1987 4Runner.   3RZ.  SAS Duals 5.29 Elocker Rear Detroit front 35s... Hydro assist
2007 Cummins 6.7 DRW g56.  deleted EFI live.
2013 Ninja 1000
SOLD:
2006 Mitsibishi EVO 9.  347WHP runs 12.2s - Wifes daily driver.  Ducati 916 - track bike.

1985CRAWLER

  • Offline The 1K Club
  • *
  • Turtle Points: 267
  • Male Posts: 1,171
  • Member since Feb '13
  • Backyard Built
Re: 03 quad cab SAS
« Reply #6 on: Jan 18, 2015, 06:27:13 PM »
Thanks guys...yeah I'm pretty jazzed ....it gets smogged tomorrow and will be my daily driver come Tuesday....so I will continue to build it and cage it or armor....

I build a lot of jeeps and personal Toyotas this is by far my favorite....

why did u get rid of the other tacoma? the black one?
low n' slow 85 runner SR5 22re,rcvs ,Duals,5.29s,Detroits f&r,40s,RUF,Chevy 63 rears,Armored,Cage

bobbed and beat 91 ex cab,3RZ swapped,dual ultimates, dana 44 sas 5.38/5.29 combo,37s, RUF, 63 rears,ARB front, detroit rear,cage

http://board.marlincrawler.com/index.php?topic=96250.msg1073007;topicseen#msg1073007

http://board.marlincrawler.com/index.php?topic=26920.390

SKULLYOTA

  • Offline Rock Crawl'n
  • **
  • Turtle Points: -57
  • Male Posts: 52
  • Member since Dec '14
  • Garage Crawler
Re: 03 quad cab SAS
« Reply #7 on: Jan 18, 2015, 10:26:26 PM »
SAS Taco's are awesome.  especially dual cabs.
85 x-cab- duals, flatbed, locked, 33's....

70 FJ55-in pieces

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #8 on: Jan 18, 2015, 11:02:34 PM »
Rolled ot out and did the radiator fan on a switch till Tuesday when I'm back at work...then I'll wire up the sending unit and relay to a thermal switch.
Did a 40 mile drive to run it and see how it handles....all good 80 down the freeway steady and controlled....
Will be doing wheel spacers in rear...its 5" over in front....





« Last Edit: Jan 18, 2015, 11:10:09 PM by bullcrew »
There's plenty of time to rest when your dead or knocked out

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #9 on: Jan 18, 2015, 11:07:45 PM »
It cost me a little bit and a lot of time....

I aced the black one for a more family friendly rig. I wanted a quad cab so it all worked out...
« Last Edit: Jan 18, 2015, 11:14:10 PM by bullcrew »
There's plenty of time to rest when your dead or knocked out

MRHilux87

  • Offline Crawler Guru
  • ****
  • Turtle Points: -306
  • Male Posts: 425
  • Member since Apr '11
Re: 03 quad cab SAS
« Reply #10 on: Jan 20, 2015, 12:31:44 AM »
Nice looking rig.  If your tires wear funny, blame the rock assaults. 
This is my favorite four door taco:    http://www.pirate4x4.com/forum/toyota-tacoma/1685298-4-seater-wife-beater.html

Whats your wheelbase?  Any plans of serious wheeling like the black one?
1987 4Runner.   3RZ.  SAS Duals 5.29 Elocker Rear Detroit front 35s... Hydro assist
2007 Cummins 6.7 DRW g56.  deleted EFI live.
2013 Ninja 1000
SOLD:
2006 Mitsibishi EVO 9.  347WHP runs 12.2s - Wifes daily driver.  Ducati 916 - track bike.

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #11 on: Jan 20, 2015, 08:14:36 AM »
Nice looking rig.  If your tires wear funny, blame the rock assaults. 
This is my favorite four door taco:    http://www.pirate4x4.com/forum/toyota-tacoma/1685298-4-seater-wife-beater.html

Whats your wheelbase?  Any plans of serious wheeling like the black one?

My tires always wear funny....they lose lugs and chunk lol....

124 on wb and yeah ra axles are 1.5 degrees in...I'll rotate em....

Yes we are trying to get it ready to go watch KOH and then run the trails afterwards....it will get used..
There's plenty of time to rest when your dead or knocked out

GRW

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 99
  • Member since Apr '06
  • 425-903-6392
Re: 03 quad cab SAS
« Reply #12 on: Jan 21, 2015, 09:27:41 AM »
 :cool: Liken that truck  :eyebrow:
84 XTRA CAB 3RZ
01 Tundra for sale
11 TDI Sportwagon
http://www.supermotors.org/vehicles/registry/showmedia.php?id=274806

Crunchy Taco

  • Offline Crawler Guru
  • ****
  • Turtle Points: 90
  • Posts: 684
  • Member since Sep '13
  • Flexiest leaf sprung taco I kno
Re: 03 quad cab SAS
« Reply #13 on: Jan 23, 2015, 06:34:49 AM »
Super clean nice work. I really like the front look I'm diggin the rock assault
98 Tacoma ex cab, Garrett T3 turbo 7psi, w56, 2.28 duals, ceramic sprung puck clutch, toyota solid axle, Tacoma rear axle w/ e-locker, plated frame front and rear, fuel tank raised with custom armored cradle, 1 ton steering 35" general grabbers wheeler/DD built from stock http://board.marlincrawler.com/index.php?topic=95652.msg1066733#msg1066733

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #14 on: Jan 23, 2015, 06:57:46 AM »
Super clean nice work. I really like the front look I'm diggin the rock assault

Thanks...
I'm looking to grab some bypass shocks and slap em on The rear as well as build a bed cage with side bed armor...get control of the leafs and also use em when I link...
There's plenty of time to rest when your dead or knocked out

Crunchy Taco

  • Offline Crawler Guru
  • ****
  • Turtle Points: 90
  • Posts: 684
  • Member since Sep '13
  • Flexiest leaf sprung taco I kno
Re: 03 quad cab SAS
« Reply #15 on: Jan 23, 2015, 10:05:44 AM »
You guna link the rear?  I really wana do the front of mine
98 Tacoma ex cab, Garrett T3 turbo 7psi, w56, 2.28 duals, ceramic sprung puck clutch, toyota solid axle, Tacoma rear axle w/ e-locker, plated frame front and rear, fuel tank raised with custom armored cradle, 1 ton steering 35" general grabbers wheeler/DD built from stock http://board.marlincrawler.com/index.php?topic=95652.msg1066733#msg1066733

BigBluePile

  • Offline Rock Master
  • ***
  • Turtle Points: -147
  • Male Posts: 230
  • Member since Feb '13
  • Conquering the toughest malls.
    • YT
    • Buy me some coffee
Re: 03 quad cab SAS
« Reply #16 on: Jan 23, 2015, 03:32:37 PM »
Another sweet project you picked up!  Good to hear this one was a little better put together :D
'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #17 on: Jan 24, 2015, 12:46:25 AM »
Another sweet project you picked up!  Good to hear this one was a little better put together :D

Yeah a bit less redoing stuff lol...
I will give his buddy doing the work credit...SUPER CLEAN....

Makes me taking over easy....built a small headboard to the bed tonight...I'll finish tomorrow and throw some pics....a place to mount hi lift and protect the Co2 tank...
There's plenty of time to rest when your dead or knocked out

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #18 on: Jan 24, 2015, 12:47:50 AM »
You guna link the rear?  I really wana do the front of mine

I will do the front first and bypass shock,s on rear in short order...but will link rear sooner than later...
There's plenty of time to rest when your dead or knocked out

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #19 on: Jan 24, 2015, 01:37:15 PM »
Built a rack, not finished yet still dimple die plates and attachments to go on as tie downs









There's plenty of time to rest when your dead or knocked out

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #20 on: Jan 25, 2015, 08:36:30 PM »
Got a good test run in....
Here's a video of me dropping a ledge

http://www.pinkbike.com/video/394487/









Then 2 different bus dies Vlad and rowel both in white XJ'S flopped same spot and matching dents on side and roof...





There's plenty of time to rest when your dead or knocked out

MRHilux87

  • Offline Crawler Guru
  • ****
  • Turtle Points: -306
  • Male Posts: 425
  • Member since Apr '11
Re: 03 quad cab SAS
« Reply #21 on: Jan 25, 2015, 10:59:45 PM »
Nice driving.  Thing works well.  Any damage?
1987 4Runner.   3RZ.  SAS Duals 5.29 Elocker Rear Detroit front 35s... Hydro assist
2007 Cummins 6.7 DRW g56.  deleted EFI live.
2013 Ninja 1000
SOLD:
2006 Mitsibishi EVO 9.  347WHP runs 12.2s - Wifes daily driver.  Ducati 916 - track bike.

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #22 on: Jan 25, 2015, 11:24:13 PM »
Nice driving.  Thing works well.  Any damage?

Not body got some undercarriage slams and drags and now I need to find what's loose on the front end....it hits a bump at a angle and starts shacking and acts lie death wobble...granted I don't have a stabalizer because I'm doinghydro assist Tuesday.

All the shackles tight
U bolts tight
Knuckle and steering arms tight

So now to wheel bearings, trunion and throw hydro on.....


Thanks and yeah I already had a plan should it go the way it did....
There's plenty of time to rest when your dead or knocked out

MRHilux87

  • Offline Crawler Guru
  • ****
  • Turtle Points: -306
  • Male Posts: 425
  • Member since Apr '11
Re: 03 quad cab SAS
« Reply #23 on: Jan 27, 2015, 08:43:02 PM »
Id check your toe angle.  Whenever i don't tack my high steer nuts they eventually come loose and then it gets toed in, which gives me death wobble.  Or your trail gear parts... just sayin.  haha.  Gotta give you a hard time for em. 
1987 4Runner.   3RZ.  SAS Duals 5.29 Elocker Rear Detroit front 35s... Hydro assist
2007 Cummins 6.7 DRW g56.  deleted EFI live.
2013 Ninja 1000
SOLD:
2006 Mitsibishi EVO 9.  347WHP runs 12.2s - Wifes daily driver.  Ducati 916 - track bike.

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #24 on: Jan 28, 2015, 08:17:10 PM »
I did and its spot on....so tomorrow I. Sticking a 2.5 degree shim  And reducing the 9 degree caster the housing has...
And doing the hydro assist ram to borrow...new bushings in the way as well for leafs...
There's plenty of time to rest when your dead or knocked out

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #25 on: Feb 02, 2015, 07:16:57 PM »
Well 3 days with hydro assist and figured out where I'm getting air in system....
The trail gear ram is leaking on the shaft at seals....3 days old and its puddling a little here and there...explains then constant need to burp because of air causing pump wine...

Yes my ram is horizontal with tie rod there's no side loading...

It felt like stock just a smidge better but still having turn issues...noticed it would feel great then like crap..
So I'll call trail gear tomorrow and get a replacement ram....ehhhhh :pokinit: happens not everything cant be perfect therefore there's warranty...lol
So no love lost at this moment....
There's plenty of time to rest when your dead or knocked out

Dingman.

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 619
  • Male Posts: 3,409
  • Member since Oct '08
Re: 03 quad cab SAS
« Reply #26 on: Feb 02, 2015, 10:58:41 PM »
Nice tacoma!

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #27 on: Feb 03, 2015, 06:36:52 AM »
Nice tacoma!
Thanks.

Had a lot of Toyotas and jeeps and this is my overall favorite.
There's plenty of time to rest when your dead or knocked out

bullcrew [OP]

  • Offline Rock Master
  • ***
  • Turtle Points: -29
  • Male Posts: 155
  • Member since Apr '13
  • looking for a rock to crawl over
Re: 03 quad cab SAS
« Reply #28 on: Feb 05, 2015, 12:54:49 AM »
Did some rock lights and the trunion bearing eliminator kit...







There's plenty of time to rest when your dead or knocked out

floorrunner

  • Offline Rock Master
  • ***
  • Turtle Points: 333
  • Male Posts: 306
  • Member since Jun '09
  • Common sense is not that common...
    • Buy me a soda
Re: 03 quad cab SAS
« Reply #29 on: Feb 05, 2015, 09:32:08 AM »
looks really good, what rock lights did u use?
87 4runner, 97 3RZ, dual ultimates, 5.29's air over elocker & arb, true longs R.I.P., York belt driven onboard air and a/c.

 
 
 
 
 

Related Topics

8 Replies
2025 Views
Last post Jan 26, 2006, 08:51:32 PM
by groelis115
6 Replies
1679 Views
Last post Mar 06, 2007, 07:25:51 AM
by daguy
936 Replies
217822 Views
Last post Jun 30, 2017, 08:46:26 AM
by Talon84x4
2 Replies
1231 Views
Last post Jun 26, 2007, 12:07:38 PM
by 42s on u
3 Replies
1526 Views
Last post Jul 31, 2011, 03:34:12 PM
by RogueDogg