Topic: 75-95 Toyota Pickup Truck 4Runner Part Liquidation Venue OEM ETC I ship from CT

[toy_tek]

83 SR5 looking for:

• all interior A/C parts.  Mine didn't come with it.  switches, wiring, evaporator & box, a/c amplifier
• center vent ducting register, the one right under the center of the dash (see pic)
• 5 spd shift knob

thx!

[Erick561 [OP]]

The last 1st gen AC truck i had in, I couldn't separate any of the nuts on the AC system,  it was corroded solid to the aluminum,  and i sold the orange cab as a whole with the title for $600. So i don't have any AC wiring on hand.  I sold my last 1st gen AC system for 400 on ebay.  I have that register under the dash and some shift knobs

83 SR5 looking for:

• all interior A/C parts.  Mine didn't come with it.  switches, wiring, evaporator & box, a/c amplifier
• center vent ducting register, the one right under the center of the dash (see pic)
• 5 spd shift knob

thx!

[Erick561 [OP]]

I've been extremely busy but we finally got the 37K 1984 Solid Axle Truck all parts available for sale first come first serve
1993 170K 22RE toyota pickup, all body panels are being used on my business colleagues truck, the drivetrain is available for sale.  Both have rotted frames.  The 93 had a bad fuel pump we got both of them running.

[Erick561 [OP]]

Both are 5 speeds
Parts selling quick

[Erick561 [OP]]

83 SR5 looking for:

• center vent ducting register, the one right under the center of the dash (see pic)
• 5 spd shift knob

thx!

Messaged you

[4x4yota]

Erick

I am in need of a complete power steering set up from a 86+ 4wd 22R/RE truck i have an 85 pickup 4wd and  i am doing crossover steering and the truck was originally manual steering so i need the lot... mounting brackets,(pump/idler) resivor, and IFS steering box.

Please let me know what you have available and price shipped to 81089.

Thank you
Mike 

[Erick561 [OP]]

I just sold the only setup that i had but i will have another one soon for you thanks for your inquiry.  It actually ended up costing $48 to ship it, but he only paid me $35

Erick

I am in need of a complete power steering set up from a 86+ 4wd 22R/RE truck i have an 85 pickup 4wd and  i am doing crossover steering and the truck was originally manual steering so i need the lot... mounting brackets,(pump/idler) resivor, and IFS steering box.

Please let me know what you have available and price shipped to 81089.

Thank you
Mike

[Capra]

Any 82-83 grilles on hand? Also looking for 1st gen runner headlamp doors and corners.

[95xtracab]

hello i need a 1st gen 4runner sunroof shade text me 8084two87291 thanks

[fireitup]

1982 22R BVSV for the carb Auxiliary Acceleration Pump system (AAP)

Functioning if it's possible for you to check.

Sent from my D5803 using Tapatalk

[Erick561 [OP]]

Hello i have to pull the 37k 84 22R motor when time and weather permits.  Its in running condition.  I might have these sensors already on hand.  It threads into the underside of the intake manifold right? I see your ear broke off in that pic will make sure to find you one that is not broken but have to research how to test it 

1982 22R BVSV for the carb Auxiliary Acceleration Pump system (AAP)

Functioning if it's possible for you to check.
Sent from my D5803 using Tapatalk

[fireitup]

Hello i have to pull the 37k 84 22R motor when time and weather permits.  Its in running condition.  I might have these sensors already on hand.  It threads into the underside of the intake manifold right? I see your ear broke off in that pic will make sure to find you one that is not broken but have to research how to test it

Topside of intake in between the carb and the valve cover. Here is a picture of it still installed before I broke the top nipple off of it...



Thats it in the top center with the two vacuum lines coming off of it and the top nipple capped with a vacuum cap.

As for testing it you just put it in boiling water and make sure it switches by blowing air through the different ports.  I will screenshot the page from my FSM later and post it here.

Thanks

[Erick561 [OP]]

Been very busy trying to keep up with all of the ebay requests, craigslist requests, and forum requests.  First come first serve

[Erick561 [OP]]

Met up with one of my networking buddies who also does as much work as me and the 22re is out 139K
Got someone interested in buying the engine today

[Erick561 [OP]]

Pulling 84 motor and axle this weekend

[Erick561 [OP]]

Hello i actually have more than 2 of these on hand not sure if theres a difference between the years

1982 22R BVSV for the carb Auxiliary Acceleration Pump system (AAP)

37K G52 Transmission, g w bellhousing, G series shift lever 4wd, rf1a forward shift g shift lever, rf1a forward shift transfer case for sale only thirty seven some.odd thousand miles on her
Engine sale tuesday
Many parts available for sale feel free to contact me
Chopping up some frames and making a scrap run soon

[Erick561 [OP]]

I have a set of 37k 8" rear and front 4.10 differentials for sale

[Snowtoy]

What do you have in the way of '89-'95 dash pieces, looking for radio bezel, drivers side, lower panel(under the steering wheel), for charcoal gray interior.

[Erick561 [OP]]

I have the lower tilt gray steering wheel bezel 1993 and a gray center bezel as well for the radio, my storage unit that its in closed at 8 so i will take pix for you tomorrow

What do you have in the way of '89-'95 dash pieces, looking for radio bezel, drivers side, lower panel(under the steering wheel), for charcoal gray interior.

1993 4wd 5spd single cab w56 22re tilt

[Snowtoy]

Thanks, looks like Toyota redesigned the driver's side lower panel.  PM e price for the center section, no hurry.

[Erick561 [OP]]

Small update sold about a ton of parts in the last week.  Still have 3 running 2.4L engines available.  Sold the solid front axle sold the 37k diffs still have too many tons of parts let me know what you need
I have 2 top shift w56b transmissions for sale.  Actually have about 5 transmissions and 3 transfer cases on hand for sale all were daily drivers low wheeling hours

[Toybrota]

G series trans for sale at all?

[mudmaster]

Do you have the steering lock mechanism with the lock cylinder and key for a 1983 PU with tilt?

[Erick561 [OP]]

G series trans for sale at all?

i sell them for 180 plus $90 shipping on ebay, undercutting my competitors

[Erick561 [OP]]

Do you have the steering lock mechanism with the lock cylinder and key for a 1983 PU with tilt?

sorry i already sold it

[Toybrota]

i sell them for 180 plus $90 shipping on ebay, undercutting my competitors

Shoot, bought one last week. I'll let you know if I need one! Thanks a million.

Sent from my Nexus 6P using Tapatalk

[Erick561 [OP]]

Sorry been real busy.  What was your year make model?
Some times people don't know their model numbers and they buy the wrong part so i usually ask people their year make model to be certain they ordered the right part.

Shoot, bought one last week. I'll let you know if I need one! Thanks a million.

Sent from my Nexus 6P using Tapatalk

[Erick561 [OP]]

Parts are selling fast, message me i just cleared my inbox

[Erick561 [OP]]

PM Replied johnny i have 1 pair left going fast!

[Erick561 [OP]]

Btt