Author Topic: im new, kinda. hi!!! cause im lonely (Read 9679 times)

SCyotacrawler420 · « **Reply #30 on:** Jan 09, 2011, 01:36:20 PM »

some front tube work

SCyotacrawler420 · « **Reply #31 on:** Jan 09, 2011, 01:37:00 PM »

rear truggy

SCyotacrawler420 · « **Reply #32 on:** Jan 09, 2011, 01:38:21 PM »

more photos

SCyotacrawler420 · « **Reply #33 on:** Jan 09, 2011, 01:41:07 PM »

photos, photos, photos

SCyotacrawler420 · « **Reply #34 on:** Jan 09, 2011, 01:43:03 PM »

more

SCyotacrawler420 · « **Reply #35 on:** Jan 09, 2011, 01:44:18 PM »

santa cruz crawler · « **Reply #36 on:** Jan 09, 2011, 01:46:09 PM »

SCyotacrawler420 · « **Reply #37 on:** Jan 09, 2011, 01:50:50 PM »

so ya, the pictures arent in order, the truggy is not long anymore, it ends right at the rear tire. so its short back there. an the front clip an tube work is almost done as it sits right now, i just need to get my motor back from (mid county which SUCKS(i will never suggest anyone go there for machine work, they have had my motor for over 6 months)) an finish small stuff here an there

THK Matt · « **Reply #38 on:** Jan 12, 2011, 09:32:29 PM »

I definately want to see this finished. lookin good.

yoshaleng · « **Reply #39 on:** Jan 13, 2011, 12:18:13 AM »

Sweet Build!

SCyotacrawler420 · « **Reply #40 on:** Jan 13, 2011, 01:25:23 AM »

i really want to finish it too, its almost been a whole year now... i cant wait to break in the motor an ring an pinion an just open this beast up. an the flex, i cant wait to flex over squeeze rock, or anything at that point

toe · « **Reply #41 on:** Jan 13, 2011, 01:50:21 AM »

santa cruz crawler · « **Reply #42 on:** Jan 13, 2011, 05:42:47 AM »

Hey where did my pics go ?
Tell Mid county to give your money back
And take it to that guy at Santa Cruz auto parts
Dean is my uncle there , any way that tech in there does every thing he gets
In about 1 week , looks good Hahaha. The bog dog!!

SloCrawler · « **Reply #43 on:** Jan 13, 2011, 09:30:28 AM »

any you guys know darren rector?

SCyotacrawler420 · « **Reply #44 on:** Jan 13, 2011, 11:50:08 AM »

did he have a green 85 straight axle with baja fenders bobbed bed?

cause if not no....

Offroadassassin · « **Reply #45 on:** Jan 13, 2011, 06:52:56 PM »

GrenadedToy · « **Reply #46 on:** Jan 16, 2011, 08:11:24 PM »

lookin good.Im diggin the headlight delete on the front end. nice work.

what are you gonna do for wiring on the 7m? integrate it with the stock truck harness?

I basically have to start from scratch since my last harness I built was for a 22r on pane. Im thinking of just using the entire supra harness and just weed out everything I dont need.

THK Matt · « **Reply #47 on:** Jan 16, 2011, 08:25:28 PM »

Quote from: GrenadedToy on Jan 16, 2011, 08:11:24 PM

lookin good.Im diggin the headlight delete on the front end. nice work.

what are you gonna do for wiring on the 7m? integrate it with the stock truck harness?

I basically have to start from scratch since my last harness I built was for a 22r on pane. Im thinking of just using the entire supra harness and just weed out everything I dont need.

that will be harder them splicing it into the truck harness. those Supra's are very sophisticated.

SCyotacrawler420 · « **Reply #48 on:** Jan 17, 2011, 01:40:46 AM »

just get another truck harned, or run a stand alone system harness for the supra motor

THK Matt · « **Reply #49 on:** Jan 17, 2011, 05:46:10 AM »

Quote from: SCyotacrawler420 on Jan 17, 2011, 01:40:46 AM

just get another truck harned, or run a stand alone system harness for the supra motor

My buddy runs a Modified Megasquirt v2 on his 85 Supra Drag Car. it flat out HAULS ASS!
I would highly recommend a Megasquirt v2 Standalone

SCyotacrawler420 · « **Reply #50 on:** Jan 17, 2011, 10:00:28 AM »

did he go with the lexus coilpacks? those look pretty nice, an i need to make an intake like that!

THK Matt · « **Reply #51 on:** Jan 17, 2011, 02:45:23 PM »

I beleive those are Lexus Coilpacks. and yes those FFIM's are well worth the effort.
He has a lot of time into that car.

He can pull well over 155mph in 3rd. its flatout insane

SCyotacrawler420 · « **Reply #52 on:** Jan 18, 2011, 01:50:06 AM »

so whats it take to get one of those ffim? im inneed of one

THK Matt · « **Reply #53 on:** Jan 18, 2011, 05:12:18 PM »

Quote from: SCyotacrawler420 on Jan 18, 2011, 01:50:06 AM

so whats it take to get one of those ffim? im inneed of one

most people make them, themselves... its all tig welded and it take the use of the stock intake runner. driftmotion may have them on their site... I know there are a few vendors on www.supramania.com selling them.

santa cruz crawler · « **Reply #54 on:** Jan 18, 2011, 06:00:35 PM »

Tig time !!
That engine looks nice!! : beerchug:

THK Matt · « **Reply #55 on:** Jan 18, 2011, 09:05:15 PM »

you can easily make one. and make the flange to fit a MAF from like a 5.0 mustang or something bigger. 90mm and bigger with a like holset 35 pushin 25-30psi and 1000psi injectors and you are lookin at one MEAN flippin engine dude.

SCyotacrawler420 · « **Reply #56 on:** Jan 24, 2011, 10:26:38 AM »

anyone want to buy this? 9,000 cash right now, i need the money badly an its worth way more just in steering, shocks, tires an tranny. all that needs to be done is get the block machined an built. bolt the motor an tranny in an mount rear shocks.

santa cruz crawler · « **Reply #57 on:** Jan 24, 2011, 11:53:38 AM »

Nope , it's not worth 9000$
You better grab your nuts and get er done
You got me into this Toyota stuff , don't give up
That truck is going to be so sick when it starts up
Put a chevy 350 in it sell the supra stuff

put a blower on it
And go muddin Don't sell it ,

SCyotacrawler420 · « **Reply #58 on:** Jan 24, 2011, 01:42:49 PM »

i have to move... an help my brother out alot because he has a niece an the army doesnt pay enough to cover that... so i really need it gone. i have to help family before toyotas, but once im settled an get back on my feet an my brother is not going through a hard ship im going to build up a yota, i love them too much

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

SCyotacrawler420 [OP]

Related Topics