Author Topic: My Build On A 92' X-Cab(UPDATE 3/21) (Read 20698 times)

UNBREAKABLE · « **on:** Nov 21, 2004, 06:18:59 PM »

I NEED TO UPDATE! CHECK BACK TOMORROW FOR A MAJOR UPDATE WITH A BUNCH OF NEW PICS AND NEW SPEC SHEET! $Beer Chug\'n$

UNBREAKABLE · « **Reply #1 on:** Nov 21, 2004, 06:20:57 PM »

Time to change the front clip to a 4Runner

UNBREAKABLE · « **Reply #2 on:** Nov 21, 2004, 06:31:35 PM »

My drop rear spring hangers(doing cantilevers and 63" 2wd Chevys). I built these so I can run 38.5 Boggers without having to use lift blocks.

If you want a set PM me and I'll hook you up custom hangers for too. They are now fully boxed too.(See lower pics)

UNBREAKABLE · « **Reply #3 on:** Nov 21, 2004, 06:36:32 PM »

#2 of rear hanger. The bar that angles back is a stop of the cantilever shackle. It has a rubber bumper made into the bottom so it doesn't clang and bang into truck all the time.

UNBREAKABLE · « **Reply #4 on:** Nov 21, 2004, 06:39:29 PM »

Here is sits on my lift with the 4-runner front(they have composite headlights

) radiator support, headlights, grill, and marker lights.

UNBREAKABLE · « **Reply #5 on:** Nov 21, 2004, 06:50:35 PM »

Here is a halfway pic of the interior. Rhino lined, RCI 5-Point harnesses, Poly seats and sliders, 4-runner 2- hole console, Pioneer CD player, and Cobra 29 LTD.

UNBREAKABLE · « **Reply #6 on:** Nov 21, 2004, 06:59:59 PM »

Truck now half way sitting on its own(no shackles yet-don't want to do that until I put the engine in). You can see my rails 2" tubing. They aren't complete just quite yet. I am working on the flatbed right now that ties into the rails (along with the exo-cage that is in the works

)

UNBREAKABLE · « **Reply #7 on:** Nov 21, 2004, 07:03:50 PM »

Drivers side pic of the truck.

Mike D · « **Reply #8 on:** Nov 21, 2004, 07:04:53 PM »

are those seat comfortable

UNBREAKABLE · « **Reply #9 on:** Nov 21, 2004, 07:05:51 PM »

Quote from: Mike D on Nov 21, 2004, 07:02:08 PM

are those seats comfortable

Can't really say...Haven't gotten to drive the truck with them in.

UNBREAKABLE · « **Reply #10 on:** Nov 21, 2004, 07:08:19 PM »

Here are my 63" hangers that I built.

UNBREAKABLE · « **Reply #11 on:** Nov 21, 2004, 07:11:51 PM »

That axle doesn't live there...it is spot sitting for a Dana 60
Spec Sheet:
AXLES
Full-Width Dana 60 Front
Full-Width Dana 70HD Rear Full-Floater
4.56 Gears
Detroit In Rear
OX Or Detroit In Front (Haven't Decided)
Getting The Adapter To Put Toyota D-Shafts On D60's
WFO HD Crossover HySteer Arms
Driveflanges
TIRES AND WHEELS
39X16.50X16.5 Pit Bull Tires
Hummer Double Beadlocks
ENGINE, TRANNY, T-CASE
7M-GTE 300+HP
W-56 Build HD
4.0 GearSet
Custom X-Member(Kinda Like Sky's...But Better)
Custom Driveshafts
FRONT SUSPENSION
Rancho 5012's
Rancho 44044's
Custom Drop Hangers and Shackles
REAR SUSPENSION
Rancho 5012's
Custom Shock Mounts
1/4 Elliptic Rear Suspension
3/4" Heim's
Y-links
63" Chevy Springs Are Being Used
BODY AND INTERIOR
4-Runner Front-End
ARB Front Bumper(Stripped And Sprayed With Sims Bedliner)
ARB Snorkel

Dovetailed and Bobbed Bed
Can't Tell What All Is Going On It

It's A Secret
Interior Is Rhino Lined
4-Runner Console(2 Bucket) Molded(Rhino'd) In
Poly Racing Buckets
RCI 5-Point Harnesses
Cobra 29 CB Custom Install On Mic (In Console)

I'm Sure I'm Forgetting Something So Check Back Soon For New Pics And Updates:

freds40 · « **Reply #12 on:** Nov 21, 2004, 09:03:00 PM »

If ya decide on 5.89s, let me know. I have a spare set I'll give ya a deal on. They look to have been installed (still have some marking compound on them) but never run.

UNBREAKABLE · « **Reply #13 on:** Nov 22, 2004, 09:34:03 AM »

PM me with an estimate.

UNBREAKABLE · « **Reply #14 on:** Nov 28, 2004, 03:39:56 PM »

A few more pics...Here is the temporary engine(3.0) Eventually a 3.4 or maybe a 4.7

UNBREAKABLE · « **Reply #15 on:** Nov 28, 2004, 03:45:43 PM »

The bumper is under etch primer(that is the reason for the odd color of an ARB)

UNBREAKABLE · « **Reply #16 on:** Nov 30, 2004, 06:26:33 PM »

Start on my cage.

UNBREAKABLE · « **Reply #17 on:** Nov 30, 2004, 06:28:41 PM »

A few more...

UNBREAKABLE · « **Reply #18 on:** Nov 30, 2004, 06:29:53 PM »

Rear hanger...

UNBREAKABLE · « **Reply #19 on:** Dec 01, 2004, 07:32:05 AM »

I haven't finished my shackles yet(gotta wait until I set the engine)

P.S. they are cantilever shackles

Techtafab · « **Reply #20 on:** Dec 01, 2004, 05:12:37 PM »

is your hoop (in back of the cab) in 4 pcs ? if so why?,that bar under the back glass go to the out side of the hoop? thats a new one never saw that also,but i am from KS we just mybe do it diff. here

, wheres them Rockwells ?

UNBREAKABLE · « **Reply #21 on:** Dec 01, 2004, 07:26:23 PM »

Them Rocks are gone...

had to sell 'em. I need to go and get another 4 sticks of tubing to finish up the cage.

UNBREAKABLE · « **Reply #22 on:** Dec 02, 2004, 06:34:29 PM »

Got my engine in today!

UNBREAKABLE · « **Reply #23 on:** Dec 02, 2004, 06:36:26 PM »

pimped4Runner · « **Reply #24 on:** Dec 03, 2004, 02:25:10 PM »

hey man hows it goin? liking your truck good job on it. i was wondering if you could send some info or dementions on the front bumber. it is awsome.
thanks man. Cody Dean 4107 mojave ct. Pasco WA 99301

Mike D · « **Reply #25 on:** Dec 03, 2004, 02:26:49 PM »

its an arb

pimped4Runner · « **Reply #26 on:** Dec 03, 2004, 02:44:20 PM »

thanks man. i appreciate it.
cody

Techtafab · « **Reply #27 on:** Dec 03, 2004, 03:02:33 PM »

SAND ?
WHAT !!!!??

UNBREAKABLE · « **Reply #28 on:** Dec 04, 2004, 03:13:38 PM »

I was going to pack it full in the lower sections...changed my mind though.

UNBREAKABLE · « **Reply #29 on:** Jan 05, 2005, 01:50:13 PM »

I've been gone for a while and just thought that I would bring my rig back up...I hope to take a few new pics tonight.

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

- Sales Employee -

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

Related Topics