Author Topic: 92 Single Cab SAS'd (Update 3/31) (Read 13394 times)

lilbuddy · « **on:** Feb 09, 2009, 08:04:18 PM »

Well my buddy Andrew is finally SAS'ing his 92.

Going to be a pretty standard build. Im sure he will chime in with details and what not.

Gettin a Toy axle and gunna run 33s for now. Its an allpro SAS kit for the front and probably ford 54's in the rear.

Pics in a few

*** YELLER *** · « **Reply #1 on:** Feb 09, 2009, 08:06:20 PM »

BLA BLA BLA

STOP TALKING AND START DOWNLOADING

LilChief87 · « **Reply #2 on:** Feb 09, 2009, 08:06:39 PM »

ooo new sas build

lilbuddy · « **Reply #3 on:** Feb 09, 2009, 08:19:22 PM »

Pics for now. Between my brother and I we welded up the front hanger. Goign to weld the backside once we cut out the IFS. Should be out by this week.

LilChief87 · « **Reply #4 on:** Feb 09, 2009, 08:24:35 PM »

some nice welds man

*** YELLER *** · « **Reply #5 on:** Feb 09, 2009, 08:25:18 PM »

thanks ChRIS

kiyul4130 · « **Reply #6 on:** Feb 09, 2009, 08:26:39 PM »

Quote from: LILBUDDY on Feb 09, 2009, 08:19:22 PM

ya, if your a jerk and do the tac tac tac method...

lilbuddy · « **Reply #7 on:** Feb 09, 2009, 08:28:53 PM »

Quote from: kiyul4130 on Feb 09, 2009, 08:26:39 PM

ya, if your a jerk and do the tac tac tac method...

Yeah and if youre a total f***t that thinks thats a tac tac method.

Its totally not kyle.

Those arent even my welds theyre my brothers and thats not how he welds. Just look at the center console in my truck

808 · « **Reply #8 on:** Feb 09, 2009, 08:36:18 PM »

thats a tight allpro shirt chris

kiyul4130 · « **Reply #9 on:** Feb 09, 2009, 08:36:29 PM »

no

dude. is that that blue one around town?

lilbuddy · « **Reply #10 on:** Feb 09, 2009, 08:40:44 PM »

Quote from: kiyul4130 on Feb 09, 2009, 08:36:29 PM

no dude. is that that blue one around town?

ya i got a pic of it around here somewhere....

Its old when it doesnt have a bobbed bed. Its bobbed like 11 inches now and the back where it was bobbed is all black

86bobbedtoy · « **Reply #11 on:** Feb 09, 2009, 08:54:54 PM »

gotta watch this build.
any full pics of the rig?

lilbuddy · « **Reply #12 on:** Feb 09, 2009, 09:00:48 PM »

Quote from: 86bobbedtoy on Feb 09, 2009, 08:54:54 PM

gotta watch this build.
any full pics of the rig?

Trying to find them back before he bobbed the bed

Duffil · « **Reply #13 on:** Feb 09, 2009, 09:01:56 PM »

AndrewJacob · « **Reply #14 on:** Feb 09, 2009, 09:04:23 PM »

im stoked on finally SAS'ing it, thanks for posting it bud. i dont really know how to post pics on here but its the truck in my side pic thing that im building. heres the plan, 83 front axle, ball gusset kit, upper truss, diff armor, all pro 4" SAS kit with hy-steer, 54" ford rears. i bobbed the bed 11", bobbed a marlin rear bumper 8". not fully sure about doing the ford rears if anyone has some suggestions

Aj

kiyul4130 · « **Reply #15 on:** Feb 09, 2009, 09:23:31 PM »

i dont think the fords are a bad idea. id say go with the chevys but there long and i think there a bit harder to work in with a single cab truck. i know when i did mine i pushed the rear end back a tad over an inch to clear the front of the tire at the fender. stretch that WB as much as you can.

4runner17 · « **Reply #16 on:** Feb 09, 2009, 09:29:21 PM »

looks good

lilbuddy · « **Reply #17 on:** Feb 09, 2009, 09:32:28 PM »

Quote from: kiyul4130 on Feb 09, 2009, 09:23:31 PM

i dont think the fords are a bad idea. id say go with the chevys but there long and i think there a bit harder to work in with a single cab truck. i know when i did mine i pushed the rear end back a tad over an inch to clear the front of the tire at the fender. stretch that WB as much as you can.

Thats exactly what I told him and why I recommended the 54" fords

AndrewJacob · « **Reply #18 on:** Feb 09, 2009, 10:34:11 PM »

ya i cant go a any further back with the rear shackle mounts, i cut the frame at them to get more out of the bob

AndrewJacob · « **Reply #19 on:** Feb 09, 2009, 10:35:31 PM »

hey chris if you are up to it, do you wanna post some more pics of the overall truck for me, i have an album on gayspace with pics of it after the bob

lilbuddy · « **Reply #20 on:** Feb 10, 2009, 07:12:25 AM »

AndrewJacob · « **Reply #21 on:** Feb 10, 2009, 08:42:30 AM »

thanks bud

twistedtoy92 · « **Reply #22 on:** Feb 10, 2009, 10:29:20 AM »

NICE START!!! Lookin good!

Nothingface5384 · « **Reply #23 on:** Feb 10, 2009, 07:55:12 PM »

yea, definatly sweet build

jimbo74 · « **Reply #24 on:** Feb 10, 2009, 07:59:39 PM »

truck looks good

808 · « **Reply #25 on:** Feb 10, 2009, 08:11:34 PM »

i saw this on cl a little while back he was asking so much for it if i remember right

LilChief87 · « **Reply #26 on:** Feb 10, 2009, 08:14:01 PM »

thats a clean truck

lilbuddy · « **Reply #27 on:** Feb 10, 2009, 10:48:33 PM »

Got the knuckle ball gussts welded on tonight. Not much more to do really beofre it gets hacked out

kiyul4130 · « **Reply #28 on:** Feb 10, 2009, 10:52:13 PM »

youll have to grind the

out of the gussets. it sucks. they should have came with a big old 45* in them where the top bearing goes.

lilbuddy · « **Reply #29 on:** Feb 10, 2009, 11:02:48 PM »

Quote from: kiyul4130 on Feb 10, 2009, 10:52:13 PM

youll have to grind the out of the gussets. it sucks. they should have came with a big old 45* in them where the top bearing goes.

Yeah I told him he needed to grind a bunch off and he did. Its kind of a stupid design. They should really fix that.

Hes goign to put the knuckle on tomorrow and see how bad it is and grind till it fits.

lilbuddy [OP]

lilbuddy [OP]

lilbuddy [OP]

lilbuddy [OP]

lilbuddy [OP]

lilbuddy [OP]

lilbuddy [OP]

lilbuddy [OP]

Related Topics