0 Members and 2 Guests are viewing this topic.
The drivers side port on the box goes to the drivers side port on the ram.The passenger side port on TOP of the box goes to the passenger side port on the ram.I dont know what to say other wise, I STILL havent added any volume to my reservoir and mine steers amazingly. I finally aired my tires back up today from 5 to 36 psi and it was UNREAL at how easy it steered. I could steer mine with out problem with it PARKED and running with only 5 psi in the tires. are you 100% POSITIVE you got the top port cleaned out in the vein? If you have ANY metal in there, it can mess it up.
that or you still have air in the system, they are a mofo to bleed sometimes guess how I know . THe cylinder may still have air in it. Unbolt the cylinder and let in hang as low as possible with the fittings up and bleed it again, this is about the best way to bleed it. You added to your res so your not sucking air there, its gotta be in the cylinder
Did you look in the top vein and see the other end? It is usually relatively difficult to get all the chips out of that vein. From the boxes I've done, I was never able to use air alone and blow all the chips out. I always had to fish out the majority. I'd also check the air. It can take a while to bleed the system. When you do it, are you filling, cycling, killing engine for 30 mins. or so to let it cool/settle, then repeating?
I have a problem, when I pulled the piston out of the ifs box, the teflon ring at the bottom was ripped, does anyone know where to get one, or know the part # so I can get one at the toy stealership?
I know the dealer sells a whole seal kit. Not sure if you can get just the teflon seal or not.
Did they say how long ago the discontinued it? Was it the whole kit or just the ring? I just bought a seal kit not to long ago.
they didnt say when, they didnt even offer me a kit, they offered me the piston assy. and they said that they didnt even have that... where did you get the seal kit, and wht part # is it?
same part # thats in the pic that Dave (OOPS) gave you in the thread you started on Pirate http://www.pirate4x4.com/forum/showthread.php?t=508309
http://www.prosteering.com/k_toyota_truck.htm
I dont know if any of you know this. But Trail Gear has a Full Ram assist kit, which comes with the ram, and all of the brackets and bolts to mount it to the toyota axle, and also has the Hydro lines, and it only costs $199.. Not bad if you ask me, No more searching for the right ram, or trying to fab your own brackets.. All you need is a taped box, or tap your own.. and a high steer kit which has a 1.25" tie rod.. Ive seen this kit and driven with one, and it makes 40's seem like there not even there.. http://www.trail-gear.com/hydro-steeringChris
Started by fabtoys Project Research and Build-Ups
Started by KYOTA General 4WD Discussion
Started by bjwest Toyota Pickup/4Runner Tech 1979-95
Started by axled89 Axle/Differential/Steering
Started by supermoto917 Axle/Differential/Steering