Author Topic: 83 Toyota parts...engine, body, MORE ADDED!! (Read 9000 times)

Glen1978 · « **on:** May 06, 2007, 03:11:00 PM »

I have an 83 Toyota that I am gonna finish parting out. It is a shortbed with frame (all suspension brackets cut off as I was gonna go full width, no rust) I have a hood, fenders, doors with glass, the cab (sunroof model, but the sunroof is broke and a PO screwed down some plexiglass!!) Have the most of the dash, wiring, just about whatever. I have 2 good 22R blocks, 2 heads (rebuilt recently, but ran) crank/rods/pistons, etc. I have a couple of radiators, fans, water pumps, gas tank, misc bolts, sensors, elec items, whatever you need I probably have 3 of them. NO axles, trannys, tcases, or drive shafts. Keep in mind this is no where near a show truck! I will take offers, not gonna set here and put a price on every little part, if you want it tell what it is and what you offer. I am very flexible, you can call me at 903-638-1916, I am located in North East Texas, will ship the smaller stuff. Glen

Glen1978 · « **Reply #1 on:** May 06, 2007, 09:31:50 PM »

I also have a good grille, headlight rings, dash cluster, etc....It is the chrome stuff so I am guessing this is an SR-5 truck. Just ask if you need something I probably got it.

mudmaster · « **Reply #2 on:** May 07, 2007, 08:13:14 AM »

I'm looking for the dash insert where the heater controls are. Do you have this? If so can you get a pic? thanks.

YotaJosh · « **Reply #3 on:** May 07, 2007, 10:55:02 AM »

Do you have the bed or a tailgate? How about taillights?

Also where about in NE TX are you? I'm in Little Rock, AR, and it's a pretty short drive down I-30.

Glen1978 · « **Reply #4 on:** May 07, 2007, 02:52:51 PM »

I will check out the heater control insert and see if it is worth your time....cant remember. As far as the bed and stuff I sold all that already. Sorry should have posted that. I might have the tail lights but I think I left them on the bed. Will check and get back to you.

Glen1978 · « **Reply #5 on:** May 07, 2007, 04:23:49 PM »

Are you talking about the actual switch panel?? If so that is in good shape and I got a pic. Post up your email and I will send it.

YotaJosh · « **Reply #6 on:** May 07, 2007, 07:21:21 PM »

Quote from: Glen1978 on May 07, 2007, 02:52:51 PM

I will check out the heater control insert and see if it is worth your time....cant remember. As far as the bed and stuff I sold all that already. Sorry should have posted that. I might have the tail lights but I think I left them on the bed. Will check and get back to you.

Ok, thanks.

mudmaster · « **Reply #7 on:** May 08, 2007, 04:57:46 AM »

Quote from: Glen1978 on May 07, 2007, 04:23:49 PM

Are you talking about the actual switch panel?? If so that is in good shape and I got a pic. Post up your email and I will send it.

Yes I am. mudmaster@gmail.com

Glen1978 · « **Reply #8 on:** May 08, 2007, 05:05:34 AM »

You need any of the cables and stuff like that?? $15.50 shipped to you, sound fair?. Sent you an email with pics.

mudmaster · « **Reply #9 on:** May 08, 2007, 08:08:08 AM »

Don't need the cables, just the nut for the fan switch. PM'd you.

Glen1978 · « **Reply #10 on:** May 08, 2007, 03:01:16 PM »

Sounds good. Will pull it out tomorrow for you.

Twisted Minis · « **Reply #11 on:** May 08, 2007, 10:42:34 PM »

Pictures of dash pad?

rednk1980 · « **Reply #12 on:** May 08, 2007, 11:19:22 PM »

do you have a timing cover for the 22r's if so how what kinda shape are they in? how much for them?

Glen1978 · « **Reply #13 on:** May 09, 2007, 05:04:41 AM »

I think the dash pad is pretty beat up but I will check it out. Need your email unless you can tell me how to post up pics on here. I have several timing covers.....one I think is fairly new but all are in good shape. Will check on that this afternoon where I get home from work. Isnt there a height difference in some of them? I want to make sure you get the right one.

Maybe $30 on the timing cover?? Is that too much? If the dash pad is ok like $20 bucks?? Let me know if this is in the ball park, you can make offers too.

Twisted Minis · « **Reply #14 on:** May 09, 2007, 09:54:37 AM »

I'll gladly pay $20 for the dash pad if it doesn't have any bad cracks or large chunks missing. My email is mavverik@sbcglobal.net.

Glen1978 · « **Reply #15 on:** May 09, 2007, 08:16:45 PM »

Mudmaster your stuff is on the way tomorrow.

Rednk I sent you a PM, I have the short one like you need.

Twisted minis, I will send you pics, It might be good enuff for you.

Anybody else c'mon lots of good stuff left, got distributors, carbs, intakes, just let me know I got three!!

Twisted Minis · « **Reply #16 on:** May 09, 2007, 09:57:18 PM »

I got the pics, emailed you back about it.

Any chance you have some extra valve covers? The early style slant nose ones? If you do I'll take them all. They work great with a bodydrop. ;D

mudmaster · « **Reply #17 on:** May 10, 2007, 04:54:52 AM »

Quote from: Glen1978 on May 09, 2007, 08:16:45 PM

Mudmaster your stuff is on the way tomorrow.

Thank you

Glen1978 · « **Reply #18 on:** May 10, 2007, 05:10:05 AM »

yeah I got a valve cover or two. Will dig them up tonight to be sure exactly what I got. I think I got two maybe three. Anything else??

Glen1978 · « **Reply #19 on:** May 10, 2007, 03:50:59 PM »

Emails sent to everyone, Mudmaster your stuff went out today via USPS. Let me know when you get it. Still got a butt load of stuff, if you need or want it just ask....probably got it.

Glen1978 · « **Reply #20 on:** May 11, 2007, 05:12:34 AM »

TTT, need to make way for new project coming in this weekend.

Petzl21 · « **Reply #21 on:** May 11, 2007, 05:26:40 AM »

Do you have both doors (good glass, complete?), and both front fenders? Are they in good shape? Will they go onto a 84 4runner (newbe here)?

Would you consider shipping those items? If so, price qte and shipping qte to 06010

Glen1978 · « **Reply #22 on:** May 11, 2007, 03:40:09 PM »

Nope 84 is different but I do have all that stuff.

Lonestar Honcho · « **Reply #23 on:** May 13, 2007, 01:38:42 PM »

Left for your trip yet? Got any good tach gauge clusters from an '82 or '83?
Thanks.

Glen1978 · « **Reply #24 on:** May 13, 2007, 01:45:04 PM »

Yes, I have one cluster w/tach from my 83 if you are interested. I will be making the trip either next weekend of the weekend after. Mommy day shot this one out. Have no idea what to ask for this. Make an offer and we can go from there.

Twisted Minis · « **Reply #25 on:** May 13, 2007, 02:26:54 PM »

How about the dash pad? I emailed you about it again.

Glen1978 · « **Reply #26 on:** May 13, 2007, 03:41:03 PM »

Still trying to find a box man, had some at work the other day and when I went back they were tore up and thrown in the trash pile........will get on it more this week.

Twisted Minis · « **Reply #27 on:** May 13, 2007, 05:25:42 PM »

Thank you.

mudmaster · « **Reply #28 on:** May 15, 2007, 05:06:30 AM »

Quote from: Glen1978 on May 10, 2007, 03:50:59 PM

Mudmaster your stuff went out today via USPS. Let me know when you get it.

Got it Saturday, thanks

Glen1978 · « **Reply #29 on:** May 15, 2007, 04:26:44 PM »

You bet man, if there is anything else just lemme know. Twisted Mini, I got a good box today, gonna go to the shop and make sure it fits and will get back with you.

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Glen1978 [OP]

Related Topics