Author Topic: Parting out 1986 4Runner  (Read 1970 times)

0 Members and 1 Guest are viewing this topic.

the_white_shadow

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Parting out 1986 4Runner
« on: Jul 09, 2018, 09:50:41 AM »
I picked this 4runner up for the transmission/t-case to swap into another toyota truck i am working on. Most of the rest of it is for sale. What doesnt sell is going to scrap. The engine is a 22re and will run on starting fluid. I installed a new pump in the tank and fuel filter. Only thing i can see is missing is the intake boot to the throttle body.

Parts im keeping or has already been spoken for:
5-speed trans and t-case including shifters and trim pieces
22re engine harness
IFS box and power steering related stuff
IFS rear end
IFS front wheel hubs
front/rear driveshafts

Prices on a few things.
wheels and tires $250 (tires are in good shape with plenty of tread 31x10.5x15)
22re with 271k on it: $350
front diff: $150
doors for half doors: $40
Frame and whats left of the tub: $100 (no title)
Seats: $100
Misc interior pieces: Make offer
Roll bar: $80
taillights in good shape: $50 for the pair
tailgate (not sure if the window goes up): $150
IFS locking hubs: $60
Calipers (lets assume for cores): $25
Gas tank and new fuel pump: $100
rear leafs: $60

If you see something you want thats not listed, let me know. I can ship small parts if they will fit in a flat rate USPS box.

Located in East Bernard (77435) but can meet in the Houston area for free.












redneckcustoms13

  • Reputation: (+1)
  • Offline The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,267
  • Member since May '15
    • Buy me a beer
Re: Parting out 1986 4Runner
« Reply #1 on: Jul 09, 2018, 11:42:02 AM »
Rear window relay?
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #2 on: Jul 09, 2018, 12:48:31 PM »
Rear window relay?

Im assuming its there. Shoot me a fair number and ill ship it to you. No clue if it works or not.


OCD

  • Reputation: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: -135
  • Posts: 222
  • Member since Sep '13
Re: Parting out 1986 4Runner
« Reply #3 on: Jul 09, 2018, 01:18:57 PM »
Is that airflow meter a #22250-35020? If so, and if it isnít all corroded inside, Iíd be interested....
How much you want shipped to 95032?

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #4 on: Jul 09, 2018, 01:49:03 PM »
Is that airflow meter a #22250-35020? If so, and if it isnít all corroded inside, Iíd be interested....
How much you want shipped to 95032?

Iíll check the number and take a few pics of the condition and get back to you. $100 shipped?

redneckcustoms13

  • Reputation: (+1)
  • Offline The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,267
  • Member since May '15
    • Buy me a beer
Re: Parting out 1986 4Runner
« Reply #5 on: Jul 09, 2018, 03:37:37 PM »
$20+ shipping not sure I've never bought one.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

:)bestgen4runner

  • Reputation: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 2184
  • Male Posts: 1,492
  • Member since Mar '16
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #6 on: Jul 09, 2018, 03:50:22 PM »
If the clock works. I would live to have it. $25 + shipping to 98038 ?
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #7 on: Jul 09, 2018, 03:51:22 PM »
$20+ shipping not sure I've never bought one.

$25 shipped works for me. PayPal aletz12485@yahoo.com if that works for you.

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #8 on: Jul 09, 2018, 03:52:30 PM »
If the clock works. I would live to have it. $25 + shipping to 98038 ?

The clock does work. $30 shipped work for you? Same PayPal as above.

:)bestgen4runner

  • Reputation: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 2184
  • Male Posts: 1,492
  • Member since Mar '16
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #9 on: Jul 09, 2018, 03:55:26 PM »
The clock does work. $30 shipped work for you? Same PayPal as above.
Yes that's fine. Let Me get My paypal up and I will send You the money. Thanks
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

redneckcustoms13

  • Reputation: (+1)
  • Offline The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,267
  • Member since May '15
    • Buy me a beer
Re: Parting out 1986 4Runner
« Reply #10 on: Jul 09, 2018, 04:29:10 PM »
Sent. Thanks.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #11 on: Jul 09, 2018, 04:31:45 PM »
Sent. Thanks.

Received. Iíll try and get in sent out in the next couple of days. Thanks.

OCD

  • Reputation: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: -135
  • Posts: 222
  • Member since Sep '13
Re: Parting out 1986 4Runner
« Reply #12 on: Jul 10, 2018, 08:08:31 AM »
Iíll check the number and take a few pics of the condition and get back to you. $100 shipped?

Hmmm... Send me a few pics when you can. I might still be interested. Corrosion recently ate one of mine, need a new spare for the parts shelf....

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #13 on: Jul 10, 2018, 08:21:52 AM »
Hmmm... Send me a few pics when you can. I might still be interested. Corrosion recently ate one of mine, need a new spare for the parts shelf....

Will do. Ill take a couple pics this evening when i get home from work and post them up.

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #14 on: Jul 11, 2018, 04:43:19 AM »
Hmmm... Send me a few pics when you can. I might still be interested. Corrosion recently ate one of mine, need a new spare for the parts shelf....

Some pics of the MAF
PArt Number:







OCD

  • Reputation: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: -135
  • Posts: 222
  • Member since Sep '13
Re: Parting out 1986 4Runner
« Reply #15 on: Jul 12, 2018, 07:32:31 AM »
I appreciate the pics, thanks man. Iím gonna hold out for a unit that doesnít need quite so much cleanup. I may regret this, I know these parts are getting harder and harder to find, but only need it for a spare so no rush...hopefully...

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #16 on: Jul 12, 2018, 08:00:25 AM »
I appreciate the pics, thanks man. Iím gonna hold out for a unit that doesnít need quite so much cleanup. I may regret this, I know these parts are getting harder and harder to find, but only need it for a spare so no rush...hopefully...

No worries. The outside could use a clean for sure but the inside is spotless. Let me know. Iím not firm on my price by any means.

Capra

  • Reputation: (+1)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 468
  • Posts: 52
  • Member since Jun '16
Re: Parting out 1986 4Runner
« Reply #17 on: Jul 16, 2018, 11:22:53 AM »
Are the grille and headlamp doors OEM?

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #18 on: Jul 16, 2018, 12:47:23 PM »
Are the grille and headlamp doors OEM?

As far as I know, yes. As you can see in the pic, the driver headlamp bezel is cracked on the outside.

Capra

  • Reputation: (+1)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 468
  • Posts: 52
  • Member since Jun '16
Re: Parting out 1986 4Runner
« Reply #19 on: Jul 16, 2018, 07:19:03 PM »
As far as I know, yes. As you can see in the pic, the driver headlamp bezel is cracked on the outside.

Damn, thatís the one I really need. You can easily tell the oem apart from the aftermarket ones. The aftermarkets are thin and bend easily.

redneckcustoms13

  • Reputation: (+1)
  • Offline The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,267
  • Member since May '15
    • Buy me a beer
Re: Parting out 1986 4Runner
« Reply #20 on: Jul 17, 2018, 04:48:47 AM »
OEM says Toyota on the back side of it.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

arlindsay1992

  • Reputation: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 423
  • Posts: 25
  • Member since Jun '16
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #21 on: Jul 17, 2018, 08:37:36 AM »
Could you take a picture of the top of the A/C compressor and the hoses going into it? Also of the A/C lines behind the grill? Mine somehow corroded super bad between the steel nuts and the aluminum male threads at most of the connections. Barely got it all apart but everything is super crunchy going back together. If they are the same as what I have I have a list of A/C parts I'd like.

dixiepc

  • Reputation: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 27
  • Member since Aug '15
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #22 on: Jul 18, 2018, 08:06:35 PM »
Redneck check your PM's

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #23 on: Jul 19, 2018, 04:21:43 AM »
Could you take a picture of the top of the A/C compressor and the hoses going into it? Also of the A/C lines behind the grill? Mine somehow corroded super bad between the steel nuts and the aluminum male threads at most of the connections. Barely got it all apart but everything is super crunchy going back together. If they are the same as what I have I have a list of A/C parts I'd like.

For some reason im just now seeing this. I guess the notification function isnt working. Ill take these pics this evening and post them up for you.

arlindsay1992

  • Reputation: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 423
  • Posts: 25
  • Member since Jun '16
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #24 on: Jul 19, 2018, 10:57:35 AM »
No rush, I'm not in a hurry.

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #25 on: Jul 20, 2018, 07:08:24 AM »
No rush, I'm not in a hurry.

Pics of the AC stuff.





:)bestgen4runner

  • Reputation: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 2184
  • Male Posts: 1,492
  • Member since Mar '16
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #26 on: Jul 20, 2018, 10:04:48 AM »
good pictures
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

arlindsay1992

  • Reputation: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 423
  • Posts: 25
  • Member since Jun '16
  • Crawling with Marlin
Re: Parting out 1986 4Runner
« Reply #27 on: Jul 20, 2018, 10:33:27 AM »
Yep, that's the same as mine. As long as the big nuts break free and turn nice on all the fittings I'm interested. How much do you want for both hoses to/from the compressor, both compressor manifolds (little blocks on top of the compressor held on by Allen head bolts), both of the metal lines that attach to the drier, the metal line that runs along the inside of the fender from the core support to the evaporator, and the pipe inside the evaporator box circled in this diagram? Basically, all the hoses/pipes in the A/C system + the manifolds. I'll pay shipping costs.


toyrunner

  • Reputation: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 136
  • Male Posts: 80
  • Member since Oct '04
  • Taco with a 2" lift. Kings and Bilsteins
Re: Parting out 1986 4Runner
« Reply #28 on: Jul 23, 2018, 03:40:26 PM »
I'm looking for the "ramp" under the tailgate attached to the underfloor that the "U" shaped spring rides on. That helps the tailgate not slam down and assists in lifting to close. Price shipped to 91106?
04 Taco TRD

the_white_shadow [OP]

  • Reputation: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Posts: 493
  • Member since Jul '08
Re: Parting out 1986 4Runner
« Reply #29 on: Jul 24, 2018, 05:13:08 AM »
this thing?

 
 
 
 
 

Related Topics

22 Replies
2264 Views
Last post Jan 01, 2006, 10:35:17 PM
by thebigl2005
37 Replies
3499 Views
Last post Mar 30, 2006, 07:03:32 AM
by alwayzbroken
35 Replies
3756 Views
Last post Sep 12, 2007, 12:06:34 PM
by vikingsven
50 Replies
3607 Views
Last post Apr 07, 2008, 10:24:28 AM
by Glen1978
7 Replies
1983 Views
Last post Oct 31, 2016, 02:40:58 PM
by 95xtracab