Author Topic: Rexy Re-Do: SUPER SLEEPER 1ST GEN!  (Read 17545 times)

0 Members and 1 Guest are viewing this topic.

H8PVMNT

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #270 on: May 01, 2018, 04:07:44 PM »
based on the crossmember I see, is it for a crossmember?  :headscratch:

Winner, winner, chicken dinner!    :biggthumpup:

Dang now I have to actually succeed in building it.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

liveoak

  • Offline Crawler Guru
  • ****
  • Turtle Points: 115
  • Posts: 636
  • Member since Mar '08
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #271 on: May 01, 2018, 04:30:20 PM »
Winner, winner, chicken dinner!    :biggthumpup:

Dang now I have to actually succeed in building it.

don't you mean winner winner possum dinner? or raccoon
my 3rz swap. http://board.marlincrawler.com/index.php?topic=97722.0

Let me start off with a basket of chips

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #272 on: May 03, 2018, 06:24:59 AM »
We don't have possums here.  Apparently they are too smart to put up with the winters.
« Last Edit: May 03, 2018, 07:08:10 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

redneckcustoms13

  • Offline The 2K Group
  • ***
  • Turtle Points: 5997
  • Male Posts: 2,231
  • Member since May '15
    • Buy me a beer
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #273 on: May 03, 2018, 09:41:28 AM »
Want some? I see atleast one or two opossum a day here. About 20 rabbits. My yard is apparently breeding ground until I let the dogs out.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #274 on: May 03, 2018, 10:33:24 AM »
Want some? I see atleast one or two opossum a day here. About 20 rabbits. My yard is apparently breeding ground until I let the dogs out.

That would really change things around here for the raccoons huh?
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

redneckcustoms13

  • Offline The 2K Group
  • ***
  • Turtle Points: 5997
  • Male Posts: 2,231
  • Member since May '15
    • Buy me a beer
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #275 on: May 03, 2018, 11:43:56 AM »
We have a ton of those to. Never witnessed a prairie dog though.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #276 on: May 03, 2018, 01:06:24 PM »
They explode when you shoot them.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #277 on: May 08, 2018, 07:21:48 AM »
Made some more tiny, progress on the duck-foot plow tooth cross member.  I ended up with several stock cross members.  I sliced the mount portion of them off and mocked it all up on the t-cases.  A bit of trailor leaf spring will fill in the gaps on the outer frame.  I will add another piece of duck foot to protect the back of the t-case where the drain plug is. The ears from the duck feet are re-attached for the frame mounts with the chamfored 1/2" duck foot bolts welded in place. I have some 1/4" scrap in odd triangles I am piecing together for the skin of it.  These are getting put together like a puzzle and sliced and bent to follow the somewhat rounded profile, then will be welded into one piece.  Should be pretty rigid with all those angles.

I have another cool re-use idea for reinforcing the front drive line drop out. This thing is going to turn out so rat-rod  :yesnod:.  I don't even think I'll paint it.



« Last Edit: May 08, 2018, 07:29:31 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

redneckcustoms13

  • Offline The 2K Group
  • ***
  • Turtle Points: 5997
  • Male Posts: 2,231
  • Member since May '15
    • Buy me a beer
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #278 on: May 08, 2018, 08:32:09 AM »
Going to kind of look like a turtle shell, while acting as a turtle shell for your turtle boxes... all of these terrapin jokes are killing me.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

kneedownnate

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1035
  • Male Posts: 9,692
  • Member since Oct '04
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #279 on: May 09, 2018, 08:28:50 AM »
Want some? I see atleast one or two opossum a day here. About 20 rabbits. My yard is apparently breeding ground until I let the dogs out.

Feel free to send me all the rabbits you want!  I only ever find them when I am not hunting
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

redneckcustoms13

  • Offline The 2K Group
  • ***
  • Turtle Points: 5997
  • Male Posts: 2,231
  • Member since May '15
    • Buy me a beer
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #280 on: May 09, 2018, 08:37:08 AM »
Not sure how to ship them.  :headscratch:
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

emsvitil

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 4972
  • Male Posts: 3,228
  • Member since May '07
    • emsvitil's album
    • Buy me a soda
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #281 on: May 09, 2018, 07:15:50 PM »

Not sure how to ship them.  :headscratch:

USPS

If it fits, it ships


 :yupyup:
Ed
SoCal
86 SR5 XtraCab
22RE  W56B
31x10.50R15

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #282 on: May 14, 2018, 06:36:41 AM »
Got a few little sessions over the weekend on the duck-foot cross member.  Finished up the puzzle piece skin of 1/4" scrap.  Made the access holes for the mount bolts and the crawl box drain, added a bit of duck foot for a leg off the back to protect the back part of the t-case that hangs down.  I boxed that in a bit so it won't bend.  I was going to use horse shoes to brace up the front drive line cut out, but they just didn't fit right.  My solution was found in the scrap bin; a bit of old chain.  I mocked up the drive line with the t-case on the x-member and tacked the chain links into position, then took it apart and welded it all up good.  Looks really rat-rod so I am pleased.

I may add a bit of additional gusset and maybe a bit of bar stock to bulk it up, but it's basically done...

I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #283 on: May 14, 2018, 06:38:07 AM »
And this morning as the sun was just peaking over the mountains I got my t-case bolted up  :biggthumpup:.

I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

300k

  • Online Crawler Guru
  • ****
  • Turtle Points: 3385
  • Male Posts: 471
  • Member since Jun '15
  • Working on my truck with Marlin
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #284 on: May 14, 2018, 07:05:47 AM »
woah! Weekend H8PVMNT! :gap:
Keep it TOYOTA!

In the past years, I used to get a lot of calls from Jeep owners wanting to go slow like the Toy trucks.

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #285 on: May 17, 2018, 07:01:06 AM »
The 1st gen trans tunnel seems a little shallow.  When you cram a W56 and duals up there on a high clearance cross member things start crawling into the cab pretty fast.  I began by cutting some shifter holes and then kept lifting and cutting until my cross member was about where I wanted it.  This resulted in the need for a new bit of trans tunnel. What started out in an exercise in tight waddedness ended up kind of cool.  I was looking for some metal to scavenge when I found a couple dented up military surplus tool boxes. I had originally intended to use the square bottom portions and then I realized how cool it would look to just use the tops...

« Last Edit: May 17, 2018, 07:26:34 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #286 on: May 21, 2018, 06:21:54 AM »
Got a bit of time Saturday.  After removing a huge garbage bag full of country living from the floorboards and finding 4 of my lost saw tools, a head lamp, several chain saw files and a bunch of shotgun shells, I was able to finish up shaping the tool boxes to fit pretty nicely on the carved up trans tunnel.  I had a dream of being able to open the hinged lids of the tool boxes to access the drivetrain, but when I set it up there was no structural integrity and the floor pan wanted to sag in the middle.  After tacking the tool boxes together in place I spot welded the lids shut and sealed all the seams and hinges with silicone.  I got it mostly welded in and cut the shifter holes.  Everything is stout again.  Looks like I will manage and easy 2" of drivetrain lift and a much flatter belly with this hack job and the duck foot cross member.  This truck will run smaller tires most of the time so every trick helps.   :thumbs:

The W56 shifter almost smacks the dash in 5th ad the 1st gen boot is too small for it. I think I'll cut off the most of the stick and weld on the old 1st gen style shifter that has a bend on the top to keep your knuckles from smacking the dash.

I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

Rockcrawlintoy

  • 4 doors for more whores
  • Offline The 2K Group
  • ***
  • Turtle Points: 1878
  • Male Posts: 2,121
  • Member since Dec '03
  • RIP Kyle
    • Buy me a soda
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #287 on: May 21, 2018, 06:47:08 AM »
That shifter looks like it has been bent.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #288 on: May 21, 2018, 06:52:52 AM »
That shifter looks like it has been bent.


Doesn't sit quite right does it?
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

Mudder

  • Offline Crawler Guru
  • ****
  • Turtle Points: 3456
  • Posts: 584
  • Member since May '15
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #289 on: May 21, 2018, 07:03:29 AM »
Is it flipped 180? It for sure isn't right when comparing it to the images on MC. It actually looks like it's been moved 90 degrees CCW from your picture.

https://www.marlincrawler.com/transmission/shifter-parts/short-throw-shifter-kit-w56-a

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #290 on: May 21, 2018, 07:27:45 AM »
Is it flipped 180? It for sure isn't right when comparing it to the images on MC. It actually looks like it's been moved 90 degrees CCW from your picture.

https://www.marlincrawler.com/transmission/shifter-parts/short-throw-shifter-kit-w56-a

Sure could be.  I'll flip it around when I get home tonight.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #291 on: May 22, 2018, 06:51:43 AM »
So I flipped it around and it made it worse.  You can't even get 1st gear.  It's either bent from being moved around with a tractor by the previous owner or just the '86 shifter doesn't fit right in the 1st gen proportions.  No biggie because I have to loose the fat shift stick to use the boot I want anyway.  I'm going to lop off the stick and weld the early one on it with a little sleeve.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #292 on: May 25, 2018, 01:17:36 PM »
Had to go fuel a machine in an old barn.  Felt eyes on me.  Pretty normal feeeling in old abandoned farmsteads though.  On my way out this guy caught me by surprise...



I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

EASYRYDERDANGER

  • Offline Rock Master
  • ***
  • Turtle Points: 1200
  • Male Posts: 142
  • Member since Jul '06
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #293 on: May 26, 2018, 07:01:23 AM »
Who?

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #294 on: May 29, 2018, 06:38:05 AM »
Caleb's cow calved this weekend.  Here it is just out and first steps a couple minutes later...

I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #295 on: May 29, 2018, 06:47:55 AM »
Installed Marlin shifter bushing and socket.  Now it has a nice tight feel you don't usually expect in a 1st gen.  Everybody should get these.   :thumbs:

Finished up duck-foot t-case cross member and made frame mounting points out of some 2"x2" square tube.  Seems nice and stout and shaved a good 4" off my belly with a nice slick dished spot to slide over things now.  I was able to hack about 2 1/2" out of my old 4runner driveshaft and welded it back together.  Truck moved of it's own power for the first time since last November. 

The W56 seems fine in general but makes a clunk, clunk, clunk in reverse so I may be tearing it apart soon.  Not sure what to expect there but It's time I learned to rebuild transmissions anyway.

I wanted to get the engine up to temp to re-adjust valves hot and retourque the head.  I went and horsed on it a bit around the property in 1st and 2nd gear.  Initial impressions of the 22re performance 282 cam are "Oh hell yes!"   :biggthumpup:

Now I have to finish exhaust, mount seats and get the bed on to start driving for reals.
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

Gnarly4X

  • Online The 2.5K Group
  • ****
  • Turtle Points: 2877
  • Male Posts: 2,546
  • Member since Jun '16
  • Marlin and I slid "The Sluice" Martinez Canyon
    • Buy me some coffee
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #296 on: May 29, 2018, 09:51:05 AM »
.... I wanted to get the engine up to temp to re-adjust valves hot and retourque the head.


I'm curious if you get ANY movement out of any of head bolts when you retorque them??  I have never detected ANY movement on ANY head bolt I've rechecked after initial install and running the engine a few miles on a 22??  And if you do... something is wrong... just my very limited experienced opinion.

Gnarls.

1986 XtraCab SR5 22RE 5speed W56B, ~10,000 MI after break-in, DIM (Did It Myself) rebuilt engine - .020" over, engnbldr RV head, OS valves, 261C cam, DT Header. https://imgur.com/oACTHTR

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #297 on: May 29, 2018, 09:54:39 AM »
I'm curious if you get ANY movement out of any of head bolts when you retorque them??  I have never detected ANY movement on ANY head bolt I've rechecked after initial install and running the engine a few miles on a 22??  And if you do... something is wrong... just my opinion.

Gnarls.



Almost none, like 1/16th turn, if even at spec torque.  I would guess what is wrong is the super cheap HG I used :)  This is also the reason I decided to go ahead and re-torque hot.  Better safe than sorry.  With a Toyota HG I wouldn't bother.
« Last Edit: May 30, 2018, 06:25:33 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #298 on: May 31, 2018, 06:58:04 AM »
Jim says 282 cam likes .007-.008 intake and .010-.011 exhaust so I will be adjusting valves hot next chance I get since I have the exhaust side at .012 now.


Here is my perspetive solutution for my clunking reverse idler gear.  I yanked this trans out of the 1 ton 2WD with W56 trans code on the vin tag. I seem to get a free 2WD every so often.  I have let the transmissions go in the past thinking they were worthless to me.  Probably best to keep ahold of the trasmissions for W56 rebuilds since they share so many parts. These 2WD W55 supposedly have different ratios in the lower gears but the same part for the reverse idler gear based on what I found.  We will be confirming this over the weekend hopefully.  Last thing I want to do right now is drop my trans, but I sure don't want to run a damaged reverse as hard as we use this pickup.


« Last Edit: May 31, 2018, 07:13:12 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

H8PVMNT [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 473
  • Male Posts: 3,409
  • Member since May '07
  • I'LL NEVER MAKE IT...
Re: Rexy Re-Do: SUPER SLEEPER 1ST GEN!
« Reply #299 on: May 31, 2018, 07:03:44 AM »
Had to make a new pipe to clear my t-case cross member.  Used old junk on the existing flanges and added a flex pipe leftover from a Celica so it can take a hit.  Now it snakes through without rubbing on anything.  Back flange still hangs below the frame.  I can't seem to get it up in there with the set of exhaust bits I have on hand right now.  I may address that later if it snags on things. I did add a bung for the AFR gauge O2 sensor.
« Last Edit: May 31, 2018, 07:49:17 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

 
 
 
 
 

Related Topics

5 Replies
1301 Views
Last post Jun 29, 2004, 12:04:08 AM
by 84runner
1 Replies
1266 Views
Last post Nov 03, 2004, 09:27:16 PM
by kyle_22r
3 Replies
1037 Views
Last post Feb 25, 2005, 10:23:27 PM
by Mike D
3 Replies
642 Views
Last post Nov 06, 2005, 11:12:40 PM
by wa4x4
35 Replies
2641 Views
Last post Dec 18, 2006, 08:00:19 AM
by *** YELLER ***